Gnome hängt sich nach boot anscheinend auf

Dieses Thema im Forum "SuSE / OpenSuSE" wurde erstellt von Subsurf, 29.07.2011.

  1. #1 Subsurf, 29.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Hallöchen allerseits,

    ich wollte meinen derzeitigen Heimserver durch eine etwas stärkere Maschine ersetzen und habe daher auf dem neuen Computer OpenSuse 11.4 installiert. Da ich - auch wenn es ein Server ist - gerne ein GUI hab, hab ich Gnome mitinstalliert.

    Nach dem Reboot kommt jedoch nur ein schwarzer Bildschirm und der Beschäftigt-Mauszeiger (drehende Punkte in weißem Kreis), den ich zwar die ganze Zeit über bewegen kann, er aber nach einiger Zeit aufhört sich zu drehen. Als ob sich Gnome aufgehängt hat.

    Mit Alt-F1 komme ich weiterhin auf die Konsole und der SSH Daemon läuft auch, sodass ich den Server jetzt immerhin schonmal einrichten und nutzen kann.
    Dennoch nervt es mich, dass Gnome nicht funktioniert.

    Was könnte da schief gelaufen sein?

    Der Computer ist ein "Fujitsu-Siemens Scenic P300, Edit X 100" mit auf 1 GiB DDR-400 aufgerüstetem RAM.
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 kartoffel200, 29.07.2011
    kartoffel200

    kartoffel200 AMD Fanboy Since 2003

    Dabei seit:
    12.03.2007
    Beiträge:
    938
    Zustimmungen:
    0
    Ort:
    L wie localhost
    stürzt dieser irgendwann ab oder dreht sich der Zeiger bis zum St. Nimmerleinstag?
    Schon mal die Logs des Xorg und dmesg angeschaut ?
     
  4. #3 Subsurf, 29.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Ich hab es grade nochmal ausprobiert:
    Der Zeiger dreht sich ein paar Sekunden lang, dann kommt kurz der normale Mauszeiger und dann wieder für ein paar Sekunden der sich drehende. Dieser hört dann auf sich zu drehen und kurz danach verschwindet er ganz.

    Ehrlich gesagt hab ich von dem was mir die Logs sagen kaum Ahnung, aber das Xorg.log ist am Ende voll von Zeilen mit dem Inhalt "(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error".

    Hier noch einmal die kompletten Logs:

    X.org.log:
    Code:
    [    32.996] 
    X.Org X Server 1.9.3
    Release Date: 2010-12-13
    [    32.996] X Protocol Version 11, Revision 0
    [    32.996] Build Operating System: openSUSE SUSE LINUX
    [    32.997] Current Operating System: Linux server 2.6.37.1-1.2-default #1 SMP 2011-02-21 10:34:10 +0100 i686
    [    32.997] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1 splash=silent quiet vga=0x31a
    [    33.004] Build Date: 22 February 2011  10:15:34PM
    [    33.004]  
    [    33.004] Current version of pixman: 0.20.0
    [    33.004] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    33.004] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    33.005] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 29 20:14:10 2011
    [    33.005] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [    33.006] (==) No Layout section.  Using the first Screen section.
    [    33.006] (**) |-->Screen "Default Screen" (0)
    [    33.006] (**) |   |-->Monitor "Default Monitor"
    [    33.006] (**) |   |-->Device "Default Device"
    [    33.006] (==) Automatically adding devices
    [    33.006] (==) Automatically enabling devices
    [    33.006] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [    33.006] 	Entry deleted from font path.
    [    33.006] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [    33.006] 	Entry deleted from font path.
    [    33.007] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [    33.007] 	Entry deleted from font path.
    [    33.007] (==) FontPath set to:
    	/usr/share/fonts/misc:unscaled,
    	/usr/share/fonts/Type1/,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/URW/,
    	/usr/share/fonts/cyrillic:unscaled,
    	/usr/share/fonts/truetype/
    [    33.007] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [    33.007] (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    33.007] (II) Loader magic: 0x8237b00
    [    33.007] (II) Module ABI versions:
    [    33.007] 	X.Org ANSI C Emulation: 0.4
    [    33.007] 	X.Org Video Driver: 8.0
    [    33.007] 	X.Org XInput driver : 11.0
    [    33.007] 	X.Org Server Extension : 4.0
    [    33.010] (--) PCI:*(0:0:2:0) 8086:2562:1734:1003 rev 1, Mem @ 0xd8000000/134217728, 0xd0000000/524288
    [    33.014] (II) Open ACPI successful (/var/run/acpid.socket)
    [    33.015] (II) LoadModule: "extmod"
    [    33.017] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    33.018] (II) Module extmod: vendor="X.Org Foundation"
    [    33.018] 	compiled for 1.9.3, module version = 1.0.0
    [    33.018] 	Module class: X.Org Server Extension
    [    33.018] 	ABI class: X.Org Server Extension, version 4.0
    [    33.018] (II) Loading extension MIT-SCREEN-SAVER
    [    33.018] (II) Loading extension XFree86-VidModeExtension
    [    33.018] (II) Loading extension XFree86-DGA
    [    33.018] (II) Loading extension DPMS
    [    33.018] (II) Loading extension XVideo
    [    33.018] (II) Loading extension XVideo-MotionCompensation
    [    33.018] (II) Loading extension X-Resource
    [    33.018] (II) LoadModule: "dbe"
    [    33.020] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    33.021] (II) Module dbe: vendor="X.Org Foundation"
    [    33.021] 	compiled for 1.9.3, module version = 1.0.0
    [    33.021] 	Module class: X.Org Server Extension
    [    33.021] 	ABI class: X.Org Server Extension, version 4.0
    [    33.021] (II) Loading extension DOUBLE-BUFFER
    [    33.021] (II) LoadModule: "glx"
    [    33.023] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    33.023] (II) Module glx: vendor="X.Org Foundation"
    [    33.023] 	compiled for 1.9.3, module version = 1.0.0
    [    33.023] 	ABI class: X.Org Server Extension, version 4.0
    [    33.023] (==) AIGLX enabled
    [    33.023] (II) Loading extension GLX
    [    33.023] (II) LoadModule: "record"
    [    33.025] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    33.026] (II) Module record: vendor="X.Org Foundation"
    [    33.026] 	compiled for 1.9.3, module version = 1.13.0
    [    33.026] 	Module class: X.Org Server Extension
    [    33.026] 	ABI class: X.Org Server Extension, version 4.0
    [    33.026] (II) Loading extension RECORD
    [    33.026] (II) LoadModule: "dri"
    [    33.028] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    33.029] (II) Module dri: vendor="X.Org Foundation"
    [    33.029] 	compiled for 1.9.3, module version = 1.0.0
    [    33.029] 	ABI class: X.Org Server Extension, version 4.0
    [    33.029] (II) Loading extension XFree86-DRI
    [    33.029] (II) LoadModule: "dri2"
    [    33.031] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    33.031] (II) Module dri2: vendor="X.Org Foundation"
    [    33.031] 	compiled for 1.9.3, module version = 1.2.0
    [    33.031] 	ABI class: X.Org Server Extension, version 4.0
    [    33.031] (II) Loading extension DRI2
    [    33.031] (==) Matched intel as autoconfigured driver 0
    [    33.031] (==) Matched fbdev as autoconfigured driver 1
    [    33.031] (==) Matched vesa as autoconfigured driver 2
    [    33.031] (==) Assigned the driver to the xf86ConfigLayout
    [    33.031] (II) LoadModule: "intel"
    [    33.033] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [    33.033] (II) Module intel: vendor="X.Org Foundation"
    [    33.033] 	compiled for 1.9.3, module version = 2.14.0
    [    33.033] 	Module class: X.Org Video Driver
    [    33.033] 	ABI class: X.Org Video Driver, version 8.0
    [    33.033] (II) LoadModule: "fbdev"
    [    33.035] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    33.035] (II) Module fbdev: vendor="X.Org Foundation"
    [    33.035] 	compiled for 1.9.3, module version = 0.4.2
    [    33.035] 	ABI class: X.Org Video Driver, version 8.0
    [    33.035] (II) LoadModule: "vesa"
    [    33.037] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    33.037] (II) Module vesa: vendor="X.Org Foundation"
    [    33.038] 	compiled for 1.9.3, module version = 2.3.0
    [    33.038] 	Module class: X.Org Video Driver
    [    33.038] 	ABI class: X.Org Video Driver, version 8.0
    [    33.038] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    	Sandybridge, Sandybridge
    [    33.038] (II) FBDEV: driver for framebuffer: fbdev
    [    33.038] (II) VESA: driver for VESA chipsets: vesa
    [    33.038] (++) using VT number 8
    
    [    33.056] (WW) Falling back to old probe method for fbdev
    [    33.056] (II) Loading sub module "fbdevhw"
    [    33.056] (II) LoadModule: "fbdevhw"
    [    33.056] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [    33.057] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    33.057] 	compiled for 1.9.3, module version = 0.0.2
    [    33.057] 	ABI class: X.Org Video Driver, version 8.0
    [    33.057] (WW) Falling back to old probe method for vesa
    [    33.057] drmOpenDevice: node name is /dev/dri/card0
    [    33.057] drmOpenDevice: open result is 9, (OK)
    [    33.057] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [    33.057] drmOpenDevice: node name is /dev/dri/card0
    [    33.057] drmOpenDevice: open result is 9, (OK)
    [    33.057] drmOpenByBusid: drmOpenMinor returns 9
    [    33.057] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [    33.057] (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen" for depth/fbbpp 24/32
    [    33.057] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [    33.058] (==) intel(0): RGB weight 888
    [    33.058] (==) intel(0): Default visual is TrueColor
    [    33.058] (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
    [    33.058] (--) intel(0): Chipset: "845G"
    [    33.058] (**) intel(0): Tiling enabled
    [    33.058] (**) intel(0): SwapBuffers wait enabled
    [    33.058] (==) intel(0): video overlay key set to 0x101fe
    [    33.193] (II) intel(0): Output VGA1 using monitor section Default Monitor
    [    33.321] (II) intel(0): EDID for output VGA1
    [    33.321] (II) intel(0): Manufacturer: ACR  Model: 1a9  Serial#: 54621579
    [    33.321] (II) intel(0): Year: 2010  Week: 34
    [    33.321] (II) intel(0): EDID Version: 1.3
    [    33.321] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    [    33.321] (II) intel(0): Sync:  Separate
    [    33.321] (II) intel(0): Max Image Size [cm]: horiz.: 48  vert.: 27
    [    33.321] (II) intel(0): Gamma: 2.20
    [    33.321] (II) intel(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
    [    33.321] (II) intel(0): First detailed timing is preferred mode
    [    33.321] (II) intel(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
    [    33.321] (II) intel(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
    [    33.321] (II) intel(0): Supported established timings:
    [    33.321] (II) intel(0): 720x400@70Hz
    [    33.321] (II) intel(0): 640x480@60Hz
    [    33.321] (II) intel(0): 640x480@67Hz
    [    33.321] (II) intel(0): 800x600@56Hz
    [    33.321] (II) intel(0): 800x600@60Hz
    [    33.321] (II) intel(0): 1024x768@60Hz
    [    33.321] (II) intel(0): 1024x768@70Hz
    [    33.321] (II) intel(0): 1280x1024@75Hz
    [    33.321] (II) intel(0): Manufacturer's mask: 0
    [    33.321] (II) intel(0): Supported standard timings:
    [    33.321] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
    [    33.321] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    [    33.321] (II) intel(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
    [    33.322] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
    [    33.322] (II) intel(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
    [    33.322] (II) intel(0): Supported detailed timing:
    [    33.322] (II) intel(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
    [    33.322] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
    [    33.322] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
    [    33.322] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
    [    33.322] (II) intel(0): Monitor name: S221HQL
    [    33.322] (II) intel(0): Serial No: LP20D0068531
    [    33.322] (II) intel(0): EDID (in hex):
    [    33.322] (II) intel(0): 	00ffffffffffff000472a9018b754103
    [    33.322] (II) intel(0): 	2214010368301b78ca3585a656489a24
    [    33.322] (II) intel(0): 	125054b30d00714f818081009500d1c0
    [    33.322] (II) intel(0): 	010101010101023a801871382d40582c
    [    33.322] (II) intel(0): 	4500dd0c1100001e000000fd00384c1f
    [    33.322] (II) intel(0): 	5311000a202020202020000000fc0053
    [    33.322] (II) intel(0): 	32323148514c0a2020202020000000ff
    [    33.322] (II) intel(0): 	004c50323044303036383533310a0015
    [    33.322] (II) intel(0): EDID vendor "ACR", prod id 425
    [    33.322] (II) intel(0): Using EDID range info for horizontal sync
    [    33.322] (II) intel(0): Using EDID range info for vertical refresh
    [    33.322] (II) intel(0): Printing DDC gathered Modelines:
    [    33.322] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    33.322] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    33.322] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.322] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    33.322] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.322] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    33.322] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    33.322] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    33.322] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.322] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    33.322] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    33.322] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    33.322] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    33.322] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    33.322] (II) intel(0): Printing probed modes for output VGA1
    [    33.322] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    33.322] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    33.322] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    33.322] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    33.323] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz)
    [    33.323] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    33.323] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    33.323] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.323] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    33.323] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.323] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    33.323] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.323] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    33.323] (II) intel(0): Output VGA1 connected
    [    33.323] (II) intel(0): Using exact sizes for initial modes
    [    33.323] (II) intel(0): Output VGA1 using initial mode 1920x1080
    [    33.323] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [    33.323] (II) intel(0): Kernel page flipping support detected, enabling
    [    33.323] (**) intel(0): Display dimensions: (480, 270) mm
    [    33.323] (**) intel(0): DPI set to (101, 101)
    [    33.323] (II) Loading sub module "fb"
    [    33.323] (II) LoadModule: "fb"
    [    33.324] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    33.324] (II) Module fb: vendor="X.Org Foundation"
    [    33.324] 	compiled for 1.9.3, module version = 1.0.0
    [    33.324] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    33.324] (II) UnloadModule: "fbdev"
    [    33.324] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    33.324] (II) UnloadModule: "fbdevhw"
    [    33.324] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
    [    33.324] (II) UnloadModule: "vesa"
    [    33.324] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    33.324] (==) Depth 24 pixmap format is 32 bpp
    [    33.324] (==) intel(0): VideoRam: 131072 KB
    [    33.325] (II) intel(0): [DRI2] Setup complete
    [    33.325] (II) intel(0): [DRI2]   DRI driver: i915
    [    33.325] (WW) intel(0): Failed to set tiling on frontbuffer.
    [    33.325] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
    [    33.325] (II) UXA(0): Driver registered support for the following operations:
    [    33.325] (II)         solid
    [    33.325] (II)         copy
    [    33.325] (II)         composite (RENDER acceleration)
    [    33.325] (II)         put_image
    [    33.325] (II)         get_image
    [    33.325] (==) intel(0): Backing store disabled
    [    33.325] (==) intel(0): Silken mouse enabled
    [    33.325] (II) intel(0): Initializing HW Cursor
    [    33.325] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [    33.361] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    33.361] (==) intel(0): DPMS enabled
    [    33.361] (==) intel(0): Intel XvMC decoder disabled
    [    33.361] (II) intel(0): Set up overlay video
    [    33.361] (II) intel(0): direct rendering: DRI2 Enabled
    [    33.361] (--) RandR disabled
    [    33.361] (II) Initializing built-in extension Generic Event Extension
    [    33.361] (II) Initializing built-in extension SHAPE
    [    33.361] (II) Initializing built-in extension MIT-SHM
    [    33.361] (II) Initializing built-in extension XInputExtension
    [    33.361] (II) Initializing built-in extension XTEST
    [    33.361] (II) Initializing built-in extension BIG-REQUESTS
    [    33.361] (II) Initializing built-in extension SYNC
    [    33.361] (II) Initializing built-in extension XKEYBOARD
    [    33.361] (II) Initializing built-in extension XC-MISC
    [    33.361] (II) Initializing built-in extension SECURITY
    [    33.361] (II) Initializing built-in extension XINERAMA
    [    33.361] (II) Initializing built-in extension XFIXES
    [    33.361] (II) Initializing built-in extension RENDER
    [    33.361] (II) Initializing built-in extension RANDR
    [    33.361] (II) Initializing built-in extension COMPOSITE
    [    33.361] (II) Initializing built-in extension DAMAGE
    [    33.381] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    33.381] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    33.382] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    33.382] (II) AIGLX: enabled GLX_SGI_make_current_read
    [    33.382] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    33.382] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
    [    33.382] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    33.382] (II) intel(0): Setting screen physical size to 507 x 285
    [    33.423] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    33.428] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
    [    33.444] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [    33.444] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    33.444] (**) Power Button: Applying InputClass "LocalKeyboard"
    [    33.444] (II) LoadModule: "evdev"
    [    33.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    33.447] (II) Module evdev: vendor="X.Org Foundation"
    [    33.447] 	compiled for 1.9.3, module version = 2.6.0
    [    33.447] 	Module class: X.Org XInput Driver
    [    33.447] 	ABI class: X.Org XInput driver, version 11.0
    [    33.447] (**) Power Button: always reports core events
    [    33.447] (**) Power Button: Device: "/dev/input/event2"
    [    33.447] (--) Power Button: Found keys
    [    33.447] (II) Power Button: Configuring as keyboard
    [    33.447] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    33.447] (**) Option "xkb_rules" "evdev"
    [    33.448] (**) Option "xkb_model" "evdev"
    [    33.448] (**) Option "xkb_layout" "de"
    [    33.448] (**) Option "xkb_variant" "nodeadkeys"
    [    33.452] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-90BEB0384DFE894FC6C76430E8611BB0119B95EE.xkm
    [    33.457] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    33.457] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    33.457] (**) Power Button: Applying InputClass "LocalKeyboard"
    [    33.457] (**) Power Button: always reports core events
    [    33.457] (**) Power Button: Device: "/dev/input/event1"
    [    33.458] (--) Power Button: Found keys
    [    33.458] (II) Power Button: Configuring as keyboard
    [    33.458] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    33.458] (**) Option "xkb_rules" "evdev"
    [    33.458] (**) Option "xkb_model" "evdev"
    [    33.458] (**) Option "xkb_layout" "de"
    [    33.458] (**) Option "xkb_variant" "nodeadkeys"
    [    33.462] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event3)
    [    33.462] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [    33.462] (**) Logitech USB Gaming Mouse: always reports core events
    [    33.463] (**) Logitech USB Gaming Mouse: Device: "/dev/input/event3"
    [    33.463] (--) Logitech USB Gaming Mouse: Found 20 mouse buttons
    [    33.463] (--) Logitech USB Gaming Mouse: Found scroll wheel(s)
    [    33.463] (--) Logitech USB Gaming Mouse: Found relative axes
    [    33.463] (--) Logitech USB Gaming Mouse: Found x and y relative axes
    [    33.463] (II) Logitech USB Gaming Mouse: Configuring as mouse
    [    33.463] (II) Logitech USB Gaming Mouse: Adding scrollwheel support
    [    33.463] (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
    [    33.463] (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    33.463] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
    [    33.463] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
    [    33.463] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
    [    33.463] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
    [    33.463] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
    [    33.463] (II) Logitech USB Gaming Mouse: initialized for relative axes.
    [    33.465] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse0)
    [    33.466] (II) No input driver/identifier specified (ignoring)
    [    33.481] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [    33.481] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    33.481] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
    [    33.481] (**) AT Translated Set 2 keyboard: always reports core events
    [    33.481] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [    33.481] (--) AT Translated Set 2 keyboard: Found keys
    [    33.481] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [    33.481] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [    33.481] (**) Option "xkb_rules" "evdev"
    [    33.481] (**) Option "xkb_model" "evdev"
    [    33.481] (**) Option "xkb_layout" "de"
    [    33.481] (**) Option "xkb_variant" "nodeadkeys"
    [    33.482] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [    33.482] (II) No input driver/identifier specified (ignoring)
    [    33.530] (EE) intel(0): failed to set cursor: Input/output error
    [    33.530] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    33.561] (EE) intel(0): failed to set cursor: Input/output error
    [    33.570] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-C37DE65A5B365D52A52EC1F2CB656087341C7EF8.xkm
    [    33.591] (EE) intel(0): failed to set cursor: Input/output error
    [    33.621] (EE) intel(0): failed to set cursor: Input/output error
    [    33.651] (EE) intel(0): failed to set cursor: Input/output error
    [    33.682] (EE) intel(0): failed to set cursor: Input/output error
    [    33.712] (EE) intel(0): failed to set cursor: Input/output error
    [    33.742] (EE) intel(0): failed to set cursor: Input/output error
    [    33.773] (EE) intel(0): failed to set cursor: Input/output error
    [    33.803] (EE) intel(0): failed to set cursor: Input/output error
    [    33.834] (EE) intel(0): failed to set cursor: Input/output error
    [    33.864] (EE) intel(0): failed to set cursor: Input/output error
    [    33.895] (EE) intel(0): failed to set cursor: Input/output error
    [    33.925] (EE) intel(0): failed to set cursor: Input/output error
    [    33.955] (EE) intel(0): failed to set cursor: Input/output error
    [    33.986] (EE) intel(0): failed to set cursor: Input/output error
    [    34.016] (EE) intel(0): failed to set cursor: Input/output error
    [    34.047] (EE) intel(0): failed to set cursor: Input/output error
    [    34.077] (EE) intel(0): failed to set cursor: Input/output error
    [    34.108] (EE) intel(0): failed to set cursor: Input/output error
    [    34.138] (EE) intel(0): failed to set cursor: Input/output error
    [    34.169] (EE) intel(0): failed to set cursor: Input/output error
    [    34.198] (EE) intel(0): failed to set cursor: Input/output error
    [    34.228] (EE) intel(0): failed to set cursor: Input/output error
    [    34.258] (EE) intel(0): failed to set cursor: Input/output error
    [    34.403] (II) intel(0): EDID vendor "ACR", prod id 425
    [    34.403] (II) intel(0): Using hsync ranges from config file
    [    34.403] (II) intel(0): Using vrefresh ranges from config file
    [    34.403] (II) intel(0): Printing DDC gathered Modelines:
    [    34.403] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    34.403] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    34.403] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    34.403] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    34.403] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    34.403] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    34.403] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    34.403] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    34.403] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    34.403] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    34.403] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    34.403] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    34.403] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    34.403] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    34.404] (EE) intel(0): failed to set cursor: Input/output error
    [    34.518] (II) intel(0): EDID vendor "ACR", prod id 425
    [    34.518] (II) intel(0): Using hsync ranges from config file
    [    34.518] (II) intel(0): Using vrefresh ranges from config file
    [    34.518] (II) intel(0): Printing DDC gathered Modelines:
    [    34.518] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    34.518] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    34.518] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    34.518] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    34.518] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    34.518] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    34.518] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    34.518] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    34.518] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    34.518] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    34.518] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    34.518] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    34.519] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    34.519] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    34.519] (EE) intel(0): failed to set cursor: Input/output error
    [    34.657] (II) intel(0): EDID vendor "ACR", prod id 425
    [    34.657] (II) intel(0): Using hsync ranges from config file
    [    34.657] (II) intel(0): Using vrefresh ranges from config file
    [    34.657] (II) intel(0): Printing DDC gathered Modelines:
    [    34.657] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    34.657] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    34.657] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    34.657] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    34.657] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    34.657] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    34.657] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    34.657] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    34.657] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    34.657] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    34.657] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    34.657] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    34.657] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    34.657] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    34.657] (EE) intel(0): failed to set cursor: Input/output error
    [    34.765] (II) intel(0): EDID vendor "ACR", prod id 425
    [    34.766] (II) intel(0): Using hsync ranges from config file
    [    34.766] (II) intel(0): Using vrefresh ranges from config file
    [    34.766] (II) intel(0): Printing DDC gathered Modelines:
    [    34.766] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    34.766] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    34.766] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    34.766] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    34.766] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    34.766] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    34.766] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    34.766] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    34.766] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    34.766] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    34.766] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    34.766] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    34.766] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    34.766] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    34.766] (EE) intel(0): failed to set cursor: Input/output error
    [    34.796] (EE) intel(0): failed to set cursor: Input/output error
    [    34.826] (EE) intel(0): failed to set cursor: Input/output error
    [    34.857] (EE) intel(0): failed to set cursor: Input/output error
    [    34.887] (EE) intel(0): failed to set cursor: Input/output error
    [    34.917] (EE) intel(0): failed to set cursor: Input/output error
    [    34.947] (EE) intel(0): failed to set cursor: Input/output error
    [    34.978] (EE) intel(0): failed to set cursor: Input/output error
    [    35.008] (EE) intel(0): failed to set cursor: Input/output error
    [    35.039] (EE) intel(0): failed to set cursor: Input/output error
    [    35.069] (EE) intel(0): failed to set cursor: Input/output error
    [    35.099] (EE) intel(0): failed to set cursor: Input/output error
    [    35.129] (EE) intel(0): failed to set cursor: Input/output error
    [    35.161] (EE) intel(0): failed to set cursor: Input/output error
    [    35.191] (EE) intel(0): failed to set cursor: Input/output error
    [    35.222] (EE) intel(0): failed to set cursor: Input/output error
    [    35.252] (EE) intel(0): failed to set cursor: Input/output error
    [    35.271] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-C37DE65A5B365D52A52EC1F2CB656087341C7EF8.xkm
    [    35.285] (EE) intel(0): failed to set cursor: Input/output error
    [    35.289] (EE) intel(0): failed to set cursor: Input/output error
    [    35.606] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    35.698] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.269] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    37.297] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    37.312] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    38.193] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.213] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.237] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.243] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.260] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.261] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.268] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.272] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.272] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.300] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.304] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.304] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.310] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.310] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.359] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.359] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.369] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.370] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.537] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.543] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.543] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.549] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.549] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.595] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.598] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.600] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.601] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.617] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.685] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.692] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.726] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.726] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.731] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.734] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.734] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.766] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.806] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.860] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.891] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.923] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.954] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.005] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.048] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.079] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.110] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.152] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.215] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.215] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.257] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.257] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.289] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.334] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.384] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.418] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.449] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.543] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.574] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.606] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.639] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.692] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.730] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.730] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.743] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.743] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.746] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.748] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    39.754] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    40.052] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    42.533] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    42.558] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    42.730] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    42.767] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.015] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.023] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.023] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.037] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.041] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.041] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.054] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.076] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.077] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.095] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.100] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.101] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.120] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.375] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.389] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.403] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.488] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.500] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.508] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.537] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.537] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.568] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.577] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.582] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.582] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.589] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.593] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.606] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.611] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.611] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.699] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.710] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.719] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    43.760] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    43.962] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    44.389] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    44.400] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    44.924] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    45.325] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    46.126] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    46.527] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    47.328] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    47.729] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    48.530] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    48.931] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    49.733] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    50.134] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    50.935] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    51.336] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    52.137] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    52.538] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    53.340] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    53.741] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    54.542] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    54.943] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    55.744] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.620] (II) Open ACPI successful (/var/run/acpid.socket)
    [    56.620] (II) AIGLX: Resuming AIGLX clients after VT switch
    [    56.731] (II) intel(0): EDID vendor "ACR", prod id 425
    [    56.731] (II) intel(0): Using hsync ranges from config file
    [    56.731] (II) intel(0): Using vrefresh ranges from config file
    [    56.731] (II) intel(0): Printing DDC gathered Modelines:
    [    56.731] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    56.731] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    56.731] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    56.731] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    56.731] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    56.731] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    56.731] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    56.731] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    56.731] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    56.731] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    56.731] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    56.731] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    56.731] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    56.732] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    56.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.743] (EE) intel(0): failed to set cursor: Input/output error
    [    56.754] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.783] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    56.946] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    57.068] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    57.348] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    57.646] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    57.670] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.405] (II) Open ACPI successful (/var/run/acpid.socket)
    [    58.405] (II) AIGLX: Resuming AIGLX clients after VT switch
    [    58.517] (II) intel(0): EDID vendor "ACR", prod id 425
    [    58.517] (II) intel(0): Using hsync ranges from config file
    [    58.517] (II) intel(0): Using vrefresh ranges from config file
    [    58.517] (II) intel(0): Printing DDC gathered Modelines:
    [    58.517] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    58.517] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    58.518] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    58.518] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    58.518] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    58.518] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    58.518] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    58.518] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    58.518] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    58.518] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    58.518] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    58.518] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    58.518] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    58.518] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    58.518] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.518] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.518] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.524] (EE) intel(0): failed to set cursor: Input/output error
    [    58.536] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.559] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.559] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    58.705] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    59.105] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    59.362] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    60.452] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    60.871] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    
    Von der letzten Zeilte noch etwa 500 mal das gleiche.

    Und nun dmesg:
    Code:
    user@server:~> dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.37.1-1.2-default (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-02-21 10:34:10 +0100
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
    [    0.000000]  BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003f700000 - 000000003f780000 (usable)
    [    0.000000]  BIOS-e820: 000000003f780000 - 0000000040000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    [    0.000000] DMI present.
    [    0.000000] DMI: FUJITSU SIEMENS SCENIC P / SCENICO P/D1740, BIOS 5.00 R1.05.1740                  08/02/2004
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x3f780 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-DFFFF uncachable
    [    0.000000]   E0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FC0000000 write-back
    [    0.000000]   1 base 03F780000 mask FFFF80000 uncachable
    [    0.000000]   2 base 03F800000 mask FFF800000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] Scanning 0 areas for low memory corruption
    [    0.000000] initial memory mapped : 0 - 01000000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 0037400000 page 2M
    [    0.000000]  0037400000 - 00377fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000
    [    0.000000] RAMDISK: 376c4000 - 37ff0000
    [    0.000000] Allocated new RAMDISK: 36d98000 - 376c3bc6
    [    0.000000] Move RAMDISK from 00000000376c4000 - 0000000037fefbc5 to 36d98000 - 376c3bc5
    [    0.000000] ACPI: RSDP 000f7a70 00014 (v00 PTLTD )
    [    0.000000] ACPI: RSDT 3f6f8271 00030 (v01 PTLTD    RSDT   00050000  LTP 00000000)
    [    0.000000] ACPI: FACP 3f6f82a1 00074 (v01 FSC    D1470    00050000      000F4240)
    [    0.000000] ACPI: DSDT 3f6f8315 02C69 (v01 FSC    D1740    00050000 MSFT 02000002)
    [    0.000000] ACPI: FACS 3f6fbfc0 00040
    [    0.000000] ACPI: APIC 3f6faf7e 0005A (v01 FSC    ? APIC   00050000  CSF 00000000)
    [    0.000000] ACPI: BOOT 3f6fafd8 00028 (v01 PTLTD  $SBFTBL$ 00050000  LTP 00000001)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 127MB HIGHMEM available.
    [    0.000000] 887MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 377fe000
    [    0.000000]   low ram: 0 - 377fe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000377fe
    [    0.000000]   HighMem  0x000377fe -> 0x0003f780
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0003f6f0
    [    0.000000]     0: 0x0003f700 -> 0x0003f780
    [    0.000000] On node 0 totalpages: 259839
    [    0.000000] free_area_init_node: node 0, pgdat c0900c00, node_mem_map f65a8200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1744 pages used for memmap
    [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 256 pages used for memmap
    [    0.000000]   HighMem zone: 32370 pages, LIFO batch:7
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0xf008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27264 r0 d21888 u4194304
    [    0.000000] pcpu-alloc: s27264 r0 d21888 u4194304 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257807
    [    0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1 splash=silent quiet vga=0x31a
    [    0.000000] bootsplash: silent mode.
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 5199040 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000377fe:0003f780)
    [    0.000000] Memory: 1007176k/1039872k available (4108k kernel code, 32180k reserved, 3121k data, 428k init, 130504k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xffd33000 - 0xfffff000   (2864 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
    [    0.000000]       .init : 0xc0910000 - 0xc097b000   ( 428 kB)
    [    0.000000]       .data : 0xc0603063 - 0xc090f708   (3121 kB)
    [    0.000000]       .text : 0xc0200000 - 0xc0603063   (4108 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]  RCU-based detection of stalled CPUs is disabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:256 16
    [    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2791.860 MHz processor.
    [    0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5583.72 BogoMIPS (lpj=11167440)
    [    0.008017] pid_max: default: 32768 minimum: 301
    [    0.008074] Security Framework initialized
    [    0.008115] AppArmor: AppArmor initialized
    [    0.008192] Mount-cache hash table entries: 512
    [    0.008403] Initializing cgroup subsys ns
    [    0.008410] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [    0.008415] Initializing cgroup subsys cpuacct
    [    0.008420] Initializing cgroup subsys memory
    [    0.008431] Initializing cgroup subsys devices
    [    0.008436] Initializing cgroup subsys freezer
    [    0.008439] Initializing cgroup subsys net_cls
    [    0.008442] Initializing cgroup subsys blkio
    [    0.008492] CPU0: Hyper-Threading is disabled
    [    0.008496] mce: CPU supports 4 MCE banks
    [    0.008512] CPU0: Thermal monitoring enabled (TM1)
    [    0.008533] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [    0.008548] ... version:                0
    [    0.008551] ... bit width:              40
    [    0.008553] ... generic registers:      18
    [    0.008555] ... value mask:             000000ffffffffff
    [    0.008558] ... max period:             0000007fffffffff
    [    0.008560] ... fixed-purpose events:   0
    [    0.008562] ... event mask:             000000000003ffff
    [    0.009229] SMP alternatives: switching to UP code
    [    0.019522] Freeing SMP alternatives: 28k freed
    [    0.019551] ACPI: Core revision 20101013
    [    0.025926] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.026241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.065931] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
    [    0.068000] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068000] Brought up 1 CPUs
    [    0.068000] Total of 1 processors activated (5583.72 BogoMIPS).
    [    0.068000] devtmpfs: initialized
    [    0.068000] regulator: core version 0.5
    [    0.068000] regulator: dummy:
    [    0.068000] Time: 18:13:37  Date: 07/29/11
    [    0.068000] NET: Registered protocol family 16
    [    0.068000] ACPI: bus type pci registered
    [    0.068000] PCI: PCI BIOS revision 2.10 entry at 0xfd8db, last bus=2
    [    0.068000] PCI: Using configuration type 1 for base access
    [    0.068000] bio: create slab <bio-0> at 0
    [    0.068289] ACPI: EC: Look up EC in DSDT
    [    0.071304] ACPI: Interpreter enabled
    [    0.071312] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.071346] ACPI: Using IOAPIC for interrupt routing
    [    0.077286] ACPI: No dock devices found.
    [    0.077295] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.077428] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.077665] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.077669] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
    [    0.077673] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.077677] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
    [    0.077680] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
    [    0.077683] pci_root PNP0A03:00: host bridge window [mem 0xfed00400-0xfedfffff] (ignored)
    [    0.077686] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffafffff] (ignored)
    [    0.077689] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffefffff] (ignored)
    [    0.077713] pci 0000:00:00.0: [8086:2560] type 0 class 0x000600
    [    0.077726] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
    [    0.077800] pci 0000:00:02.0: [8086:2562] type 0 class 0x000300
    [    0.077817] pci 0000:00:02.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
    [    0.077828] pci 0000:00:02.0: reg 14: [mem 0xd0000000-0xd007ffff]
    [    0.077933] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
    [    0.077982] pci 0000:00:1d.0: reg 20: [io  0x1000-0x101f]
    [    0.078020] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
    [    0.078069] pci 0000:00:1d.1: reg 20: [io  0x1400-0x141f]
    [    0.078107] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
    [    0.078156] pci 0000:00:1d.2: reg 20: [io  0x1800-0x181f]
    [    0.078205] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
    [    0.078229] pci 0000:00:1d.7: reg 10: [mem 0xd0080000-0xd00803ff]
    [    0.078315] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.078320] pci 0000:00:1d.7: PME# disabled
    [    0.078342] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.078389] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
    [    0.078393] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
    [    0.078395] * this clock source is slow. If you are sure your timer does not have
    [    0.078396] * this bug, please use "acpi_pm_good" to disable the workaround
    [    0.078469] pci 0000:00:1f.0: quirk: [io  0xf000-0xf07f] claimed by ICH4 ACPI/GPIO/TCO
    [    0.078473] pci 0000:00:1f.0: quirk: [io  0xf180-0xf1bf] claimed by ICH4 GPIO
    [    0.078496] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
    [    0.078512] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
    [    0.078523] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
    [    0.078534] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
    [    0.078546] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
    [    0.078557] pci 0000:00:1f.1: reg 20: [io  0x2800-0x280f]
    [    0.078568] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
    [    0.078599] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
    [    0.078648] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
    [    0.078690] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
    [    0.078708] pci 0000:00:1f.5: reg 10: [io  0x2400-0x24ff]
    [    0.078718] pci 0000:00:1f.5: reg 14: [io  0x2000-0x203f]
    [    0.078729] pci 0000:00:1f.5: reg 18: [mem 0xd0080c00-0xd0080dff]
    [    0.078739] pci 0000:00:1f.5: reg 1c: [mem 0xd0080800-0xd00808ff]
    [    0.078781] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    [    0.078786] pci 0000:00:1f.5: PME# disabled
    [    0.078822] pci 0000:02:01.0: [1317:0985] type 0 class 0x000200
    [    0.078840] pci 0000:02:01.0: reg 10: [io  0x3000-0x30ff]
    [    0.078851] pci 0000:02:01.0: reg 14: [mem 0xd0100000-0xd01003ff]
    [    0.078894] pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.078913] pci 0000:02:01.0: supports D1 D2
    [    0.078916] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.078921] pci 0000:02:01.0: PME# disabled
    [    0.078966] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
    [    0.078972] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
    [    0.078977] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
    [    0.078983] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.078986] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.078989] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [    0.079000] pci_bus 0000:00: on NUMA node 0
    [    0.079005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.079166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
    [    0.082602] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.082739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.082871] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.083005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.083116] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.083227] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.083340] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.083473] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.083522] HEST: Table is not found!
    [    0.083795] SCSI subsystem initialized
    [    0.083896] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.083905] vgaarb: loaded
    [    0.084105] PCI: Using ACPI for IRQ routing
    [    0.084146] PCI: pci_cache_line_size set to 64 bytes
    [    0.084203] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [    0.084207] reserve RAM buffer: 000000003f6f0000 - 000000003fffffff
    [    0.084210] reserve RAM buffer: 000000003f780000 - 000000003fffffff
    [    0.084353] NetLabel: Initializing
    [    0.084356] NetLabel:  domain hash size = 128
    [    0.084358] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.084374] NetLabel:  unlabeled traffic allowed by default
    [    0.084389] Switching to clocksource tsc
    [    0.086127] AppArmor: AppArmor Filesystem Enabled
    [    0.086159] pnp: PnP ACPI init
    [    0.086205] ACPI: bus type pnp registered
    [    0.086426] pnp 00:00: [bus 00-ff]
    [    0.086430] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.086434] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.086438] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.086440] pnp 00:00: [mem 0x000c8000-0x000dffff window]
    [    0.086443] pnp 00:00: [mem 0x40000000-0xfebfffff window]
    [    0.086446] pnp 00:00: [mem 0xfed00400-0xfedfffff window]
    [    0.086449] pnp 00:00: [mem 0xfee01000-0xffafffff window]
    [    0.086452] pnp 00:00: [mem 0xffc00000-0xffefffff window]
    [    0.086455] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.086558] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.086890] pnp 00:01: [mem 0xffb00000-0xffbfffff]
    [    0.086936] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.086960] pnp 00:02: [io  0x0010-0x001f]
    [    0.086963] pnp 00:02: [io  0x0022-0x002d]
    [    0.086965] pnp 00:02: [io  0x0030-0x003f]
    [    0.086968] pnp 00:02: [io  0x0050-0x0053]
    [    0.086970] pnp 00:02: [io  0x0062-0x0063]
    [    0.086973] pnp 00:02: [io  0x0065-0x006f]
    [    0.086975] pnp 00:02: [io  0x0074-0x007f]
    [    0.086977] pnp 00:02: [io  0x0090-0x009f]
    [    0.086980] pnp 00:02: [io  0x00a2-0x00b1]
    [    0.086982] pnp 00:02: [io  0x00b2-0x00b3]
    [    0.086985] pnp 00:02: [io  0x00b4-0x00bf]
    [    0.086987] pnp 00:02: [io  0x00e0-0x00ef]
    [    0.086990] pnp 00:02: [io  0x0072-0x0073]
    [    0.086992] pnp 00:02: [io  0x002e-0x002f]
    [    0.086995] pnp 00:02: [io  0x04d0-0x04d1]
    [    0.086997] pnp 00:02: [io  0xf000-0xf07f]
    [    0.087000] pnp 00:02: [io  0xf100-0xf10f]
    [    0.087002] pnp 00:02: [io  0xf180-0xf1bf]
    [    0.087005] pnp 00:02: [io  0x0800-0x087f]
    [    0.087007] pnp 00:02: [io  0xf820-0xf82f]
    [    0.087010] pnp 00:02: [io  0xfe00]
    [    0.087097] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.087116] pnp 00:03: [io  0x0000-0x000f]
    [    0.087119] pnp 00:03: [io  0x0080-0x008f]
    [    0.087122] pnp 00:03: [io  0x00c0-0x00df]
    [    0.087125] pnp 00:03: [dma 4]
    [    0.087168] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.087192] pnp 00:04: [io  0x0070-0x0071]
    [    0.087218] pnp 00:04: [irq 8]
    [    0.087261] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.087285] pnp 00:05: [io  0x00f0-0x00fe]
    [    0.087291] pnp 00:05: [irq 13]
    [    0.087335] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.087352] pnp 00:06: [io  0x0061]
    [    0.087399] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.087425] pnp 00:07: [io  0x0060]
    [    0.087429] pnp 00:07: [io  0x0064]
    [    0.087435] pnp 00:07: [irq 1]
    [    0.087479] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.087680] pnp 00:08: [io  0x03f0-0x03f5]
    [    0.087683] pnp 00:08: [io  0x03f7]
    [    0.087686] pnp 00:08: [dma 2]
    [    0.087691] pnp 00:08: [irq 6]
    [    0.087759] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.087776] pnp 00:09: [io  0x0378-0x037b]
    [    0.087785] pnp 00:09: [irq 7]
    [    0.087974] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [    0.088378] pnp 00:0a: [io  0x03f8-0x03ff]
    [    0.088385] pnp 00:0a: [irq 4]
    [    0.088463] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.088541] pnp: PnP ACPI: found 11 devices
    [    0.088544] ACPI: ACPI bus type pnp unregistered
    [    0.088550] PnPBIOS: Disabled by ACPI PNP
    [    0.088570] system 00:02: [io  0x04d0-0x04d1] has been reserved
    [    0.088574] system 00:02: [io  0xf000-0xf07f] has been reserved
    [    0.088577] system 00:02: [io  0xf100-0xf10f] has been reserved
    [    0.088581] system 00:02: [io  0xf180-0xf1bf] has been reserved
    [    0.088584] system 00:02: [io  0x0800-0x087f] has been reserved
    [    0.088587] system 00:02: [io  0xf820-0xf82f] has been reserved
    [    0.088590] system 00:02: [io  0xfe00] has been reserved
    [    0.125905] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
    [    0.125913] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40100000-0x401003ff]
    [    0.125921] pci 0000:00:1f.1: BAR 5: set to [mem 0x40100000-0x401003ff] (PCI address [0x40100000-0x401003ff])
    [    0.125926] pci 0000:02:01.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
    [    0.125930] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
    [    0.125934] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
    [    0.125940] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
    [    0.125946] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x400fffff pref]
    [    0.125968] pci 0000:00:1e.0: setting latency timer to 64
    [    0.125974] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    [    0.125977] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    [    0.125981] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
    [    0.125984] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
    [    0.125987] pci_bus 0000:02: resource 2 [mem 0x40000000-0x400fffff pref]
    [    0.125990] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
    [    0.125993] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
    [    0.126091] NET: Registered protocol family 2
    [    0.126192] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.126709] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.128450] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.129416] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.129422] TCP reno registered
    [    0.129437] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.129471] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.129763] NET: Registered protocol family 1
    [    0.129803] pci 0000:00:02.0: Boot video device
    [    0.129915] PCI: CLS 32 bytes, default 64
    [    0.130036] Unpacking initramfs...
    [    0.405312] Freeing initrd memory: 9392k freed
    [    0.426114] Simple Boot Flag at 0x69 set to 0x1
    [    0.426468] Scanning for low memory corruption every 60 seconds
    [    0.426717] audit: initializing netlink socket (disabled)
    [    0.426747] type=2000 audit(1311963217.420:1): initialized
    [    0.441320] highmem bounce pool size: 64 pages
    [    0.441329] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.441514] VFS: Disk quotas dquot_6.5.2
    [    0.441550] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.441711] msgmni has been set to 432
    [    0.441997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.442004] io scheduler noop registered
    [    0.442007] io scheduler deadline registered
    [    0.442022] io scheduler cfq registered (default)
    [    0.443408] vesafb: framebuffer at 0xd8000000, mapped to 0xf8080000, using 5120k, total 8000k
    [    0.443412] vesafb: mode is 1280x1024x16, linelength=2560, pages=2
    [    0.443414] vesafb: scrolling: redraw
    [    0.443418] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    [    0.444679] bootsplash 3.1.6-2004/03/31: looking for picture...
    [    0.444688] bootsplash: silentjpeg size 245922 bytes
    [    0.474580] bootsplash: ...found (1280x1024, 131007 bytes, v3).
    [    0.588029] Console: switching to colour frame buffer device 156x60
    [    0.701672] fb0: VESA VGA frame buffer device
    [    0.701827] ERST: Table is not found!
    [    0.701868] isapnp: Scanning for PnP cards...
    [    1.012317] isapnp: No Plug & Play device found
    [    1.012706] Non-volatile memory driver v1.3
    [    1.012709] Linux agpgart interface v0.103
    [    1.012818] agpgart-intel 0000:00:00.0: Intel 830M Chipset
    [    1.012860] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
    [    1.013096] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [    1.016462] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
    [    1.016548] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
    [    1.036942] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.058761] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.059027] Fixed MDIO Bus: probed
    [    1.059099] PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
    [    1.059102] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.059653] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.059780] mice: PS/2 mouse device common for all mice
    [    1.059981] cpuidle: using governor ladder
    [    1.059984] cpuidle: using governor menu
    [    1.060302] TCP cubic registered
    [    1.060342] NET: Registered protocol family 10
    [    1.060754] lo: Disabled Privacy Extensions
    [    1.061027] Registering the dns_resolver key type
    [    1.061110] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
    [    1.061125] Using IPI No-Shortcut mode
    [    1.061286] PM: Checking hibernation image partition /dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1
    [    1.078968] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.079044] PM: Hibernation image not present or could not be loaded.
    [    1.079063] registered taskstats version 1
    [    1.079232]   Magic number: 3:264:242
    [    1.079442] Freeing unused kernel memory: 428k freed
    [    1.080201] Write protecting the kernel text: 4112k
    [    1.080244] Write protecting the kernel read-only data: 2864k
    [    1.169527] libata version 3.00 loaded.
    [    1.193657] ata_piix 0000:00:1f.1: version 2.13
    [    1.193699] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.193775] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    1.194303] scsi0 : ata_piix
    [    1.194457] scsi1 : ata_piix
    [    1.195542] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2800 irq 14
    [    1.195547] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2808 irq 15
    [    1.356644] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0F15, max UDMA/33
    [    1.356736] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/133
    [    1.356739] ata1.00: 78242976 sectors, multi 16: LBA48
    [    1.364340] ata1.00: configured for UDMA/100
    [    1.364525] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
    [    1.364943] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
    [    1.365009] sd 0:0:0:0: [sda] Write Protect is off
    [    1.365013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.365041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.372181] ata2.00: configured for UDMA/33
    [    1.377615]  sda: sda1 sda2
    [    1.378067] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.381944] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0F15 PQ: 0 ANSI: 5
    [    1.404535] ACPI: acpi_idle registered with cpuidle
    [    1.424349] udev[77]: starting version 166
    [    1.479504] usbcore: registered new interface driver usbfs
    [    1.479552] usbcore: registered new interface driver hub
    [    1.509997] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [    1.510098] ACPI: Power Button [PWRB]
    [    1.510195] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    1.510241] ACPI: Power Button [PWRF]
    [    1.727184] rtc_cmos 00:04: RTC can wake from S4
    [    1.727329] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.727363] rtc0: alarms up to one month, y3k, 114 bytes nvram
    [    1.768461] [drm] Initialized drm 1.1.0 20060810
    [    1.806242] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.806252] i915 0000:00:02.0: setting latency timer to 64
    [    1.836119] usbcore: registered new device driver usb
    [    1.837710] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    1.838164] [drm] initialized overlay support
    [    1.847275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.993151] checking generic (d8000000 7d0000) vs hw (d8000000 8000000)
    [    1.993157] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [    1.993198] Console: switching to colour dummy device 80x25
    [    2.092438] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.200586] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.297754] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.405857] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.464101] Console: switching to colour frame buffer device 236x63
    [    2.503231] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.610821] bootsplash: scaling image from 1280x1024 to 1920x1080
    [    2.669320] fb0: inteldrmfb frame buffer device
    [    2.669325] drm: registered panic notifier
    [    2.669653] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    2.670566] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [    2.670604] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    2.670610] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    2.670666] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    2.670732] ehci_hcd 0000:00:1d.7: debug port 1
    [    2.674611] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    2.674639] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0080000
    [    2.688047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.688124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    2.688128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.688132] usb usb1: Product: EHCI Host Controller
    [    2.688135] usb usb1: Manufacturer: Linux 2.6.37.1-1.2-default ehci_hcd
    [    2.688138] usb usb1: SerialNumber: 0000:00:1d.7
    [    2.688394] hub 1-0:1.0: USB hub found
    [    2.688405] hub 1-0:1.0: 6 ports detected
    [    2.695335] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.695461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.695479] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    2.695484] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.695516] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    2.695553] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
    [    2.695623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.695626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.695630] usb usb2: Product: UHCI Host Controller
    [    2.695632] usb usb2: Manufacturer: Linux 2.6.37.1-1.2-default uhci_hcd
    [    2.695635] usb usb2: SerialNumber: 0000:00:1d.0
    [    2.695870] hub 2-0:1.0: USB hub found
    [    2.695878] hub 2-0:1.0: 2 ports detected
    [    2.696048] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.696062] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    2.696066] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.696077] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    2.696117] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001400
    [    2.696173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.696177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.696179] usb usb3: Product: UHCI Host Controller
    [    2.696182] usb usb3: Manufacturer: Linux 2.6.37.1-1.2-default uhci_hcd
    [    2.696185] usb usb3: SerialNumber: 0000:00:1d.1
    [    2.696343] hub 3-0:1.0: USB hub found
    [    2.696348] hub 3-0:1.0: 2 ports detected
    [    2.696437] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.696449] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    2.696453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.696462] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    2.696498] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001800
    [    2.696550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.696553] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.696556] usb usb4: Product: UHCI Host Controller
    [    2.696559] usb usb4: Manufacturer: Linux 2.6.37.1-1.2-default uhci_hcd
    [    2.696561] usb usb4: SerialNumber: 0000:00:1d.2
    [    2.696705] hub 4-0:1.0: USB hub found
    [    2.696710] hub 4-0:1.0: 2 ports detected
    [    3.093778] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
    [    3.093786] PM: Basic memory bitmaps created
    [    3.101231] PM: Basic memory bitmaps freed
    [    3.177134] PM: Starting manual resume from disk
    [    3.177140] PM: Hibernation image partition 8:1 present
    [    3.177142] PM: Looking for hibernation image.
    [    3.177501] PM: Image not found (code -22)
    [    3.177504] PM: Hibernation image not present or could not be loaded.
    [    3.368044] usb 2-1: new full speed USB device using uhci_hcd and address 2
    [    3.419215] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
    [    3.551449] usb 2-1: New USB device found, idVendor=046d, idProduct=c042
    [    3.551455] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    3.551458] usb 2-1: Product: USB Gaming Mouse
    [    3.551461] usb 2-1: Manufacturer: Logitech
    [    3.591673] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
    [    3.591930] generic-usb 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1/input0
    [    3.601692] generic-usb 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1/input1
    [    3.601733] usbcore: registered new interface driver usbhid
    [    3.601736] usbhid: USB HID core driver
    [    3.676920] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
    [    5.650580] preloadtrace: systemtap: 1.4/0.149, base: f893a000, memory: 30data/39text/6ctx/13net/260alloc kb, probes: 34
    [    6.476403] udev[345]: starting version 166
    [    7.024823] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    7.024881] scsi 1:0:0:0: Attached scsi generic sg1 type 5
    [    7.302285] Floppy drive(s): fd0 is 1.44M
    [    7.319743] FDC 0 is a post-1991 82077
    [    7.342739] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [    7.383148] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    7.423183] intel_rng: FWH not detected
    [    7.559419] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    7.569395] parport_pc 00:09: reported by Plug and Play ACPI
    [    7.569423] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [    7.577196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    7.592327] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
    [    7.592334] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    7.592513] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    7.688896] ppdev: user-space parallel port driver
    [    7.835502] iTCO_vendor_support: vendor-support=0
    [    7.850180] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [    7.850306] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xf060)
    [    7.850455] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    8.011176] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
    [    8.011256] tulip 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    8.011291] tulip_init_one: Enabled WOL support for AN983B
    [    8.011966] tulip0:  MII transceiver #1 config 1000 status 786d advertising 05e1
    [    8.019359] net eth0: ADMtek Comet rev 17 at Port 0x3000, 00:30:05:67:d7:fe, IRQ 23
    [    8.463198] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    8.463274] Intel ICH 0000:00:1f.5: setting latency timer to 64
    [    8.784031] intel8x0_measure_ac97_clock: measured 54260 usecs (2615 samples)
    [    8.784037] intel8x0: clocking to 48000
    [    9.115138] Adding 3147772k swap on /dev/sda1.  Priority:-1 extents:1 across:3147772k
    [   10.266957] device-mapper: uevent: version 1.0.3
    [   10.268166] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
    [   12.610008] type=1400 audit(1311963229.608:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=733 comm="apparmor_parser"
    [   12.707120] type=1400 audit(1311963229.704:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=738 comm="apparmor_parser"
    [   12.935808] type=1400 audit(1311963229.932:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=742 comm="apparmor_parser"
    [   13.131098] type=1400 audit(1311963230.128:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=746 comm="apparmor_parser"
    [   13.952407] type=1400 audit(1311963230.952:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=751 comm="apparmor_parser"
    [   13.952784] type=1400 audit(1311963230.952:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=751 comm="apparmor_parser"
    [   13.952943] type=1400 audit(1311963230.952:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=751 comm="apparmor_parser"
    [   13.953224] type=1400 audit(1311963230.952:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=751 comm="apparmor_parser"
    [   14.177460] type=1400 audit(1311963231.176:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=755 comm="apparmor_parser"
    [   15.869915] type=1400 audit(1311963232.868:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=759 comm="apparmor_parser"
    [   18.123043] audit_printk_skb: 6 callbacks suppressed
    [   18.123050] type=1400 audit(1311963235.120:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=771 comm="apparmor_parser"
    [   18.687506] type=1400 audit(1311963235.684:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3" pid=775 comm="apparmor_parser"
    [   19.081666] type=1400 audit(1311963236.080:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=779 comm="apparmor_parser"
    [   19.607541] type=1400 audit(1311963236.604:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=783 comm="apparmor_parser"
    [   20.039465] type=1400 audit(1311963237.036:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dnsmasq" pid=787 comm="apparmor_parser"
    [   20.368901] type=1400 audit(1311963237.368:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=791 comm="apparmor_parser"
    [   20.514564] type=1400 audit(1311963237.512:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=795 comm="apparmor_parser"
    [   20.662620] type=1400 audit(1311963237.660:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mdnsd" pid=799 comm="apparmor_parser"
    [   20.823004] type=1400 audit(1311963237.820:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=803 comm="apparmor_parser"
    [   21.024756] type=1400 audit(1311963238.024:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=807 comm="apparmor_parser"
    [   21.982695] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   22.068753] nf_conntrack version 0.5.0 (15891 buckets, 63564 max)
    [   22.082874] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   22.353007] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   22.473210] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   22.770242] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    [   23.208596] powernow: This module only works with AMD K7 CPUs
    [   24.486343] audit_printk_skb: 9 callbacks suppressed
    [   24.486348] type=1400 audit(1311963241.484:27): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=1204 comm="gdm-session-wor"
    [   24.486372] type=1400 audit(1311963241.484:28): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=1204 comm="gdm-session-wor"
    [   26.804316] fuse init (API version 7.15)
    [   27.202165] NET: Registered protocol family 17
    [   30.065845] 0000:02:01.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
    [   30.065863] net eth0: Setting full-duplex based on MII#1 link partner capability of 45e1
    [   32.060057] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [   32.068280] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 2074 at 2023, next 2250)
    [   32.084506] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 00000000 head 00017b54 tail 00000000 start 007df000
    [   32.084522] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f003 head 00017b54 tail 00000000 start 007df000
    [   32.376015] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [   32.377369] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 2273 at 2023, next 2274)
    [   32.377429] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [   32.377434] [drm:i915_reset] *ERROR* Failed to reset chip.
    [   32.517933] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   32.626118] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   37.584053] eth0: no IPv6 routers present
    [   37.832590] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
    [   44.002457] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   44.118098] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   44.215770] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   44.324185] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   60.491807] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   60.600613] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   60.698669] bootsplash: scaling image from 1280x1024 to 1920x1080
    [   60.807400] bootsplash: scaling image from 1280x1024 to 1920x1080
    [  105.878779] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:30:05:67:d7:fe:6c:f0:49:05:b0:a0:08:00 SRC=192.168.1.100 DST=192.168.1.105 LEN=52 TOS=0x00 PREC=0x00 TTL=128 ID=24019 DF PROTO=TCP SPT=52599 DPT=22 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405B40103030201010402)
    
     
  5. #4 marcellus, 29.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
    Mir sieht das stark nach einer kaputten grafikkarte aus. Zumindest direct rendering scheint er gar nicht gern zu haben.

    Wenn du den als "etwas stärkeres" bezeichnest will ich gar nicht wissen, wie dein alter war.

    Wunder kannst du dir an der stelle nicht erwarten, wenn du überhaupt eine grafische Oberfläche auf dem ding zum laufen bekommst wird das ohne hardware beschleunigung sein, sprich kein compositing und es würde mich auch wundern, wenn du videos zum laufen bekommen würdest. Falls du einen agp slot hast würd ich an deiner stelle irgendeine alte agp karte kaufen und die interne ignorieren.

    Da es bei modernen distributionen keine xorg.conf gibt werden wir die vermutlich erstellen müssen, führ "X -config" aus, das sollte dir eine /etc/X11/xorg.conf anlegen. Post deine xorg.conf hier.
     
  6. #5 Subsurf, 30.07.2011
    Zuletzt bearbeitet: 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Also, mit Debian 6 und Linux Mint 11 funktioniert Gnome auf dem Computer wunderbar, daher wunderts mich dass sich Gnome mit OpenSuSE weigert.

    Werde die xorg.conf mal anlegen.

    **edit:
    Wie ich grade gesehen habe, blinkt bei der grafischen Ansicht nach dem Wechsel zur Konsole (Strg+Alt+F1 und dann zurück mit Strg+Alt+F7) oben links in der Ecke ein Cursor, der Mauszeiger ist aber weg.

    Hier der Inhalt von xorg.conf
    Code:
    Section "ServerLayout"
    	Identifier     "X.org Configured"
    	Screen      0  "Screen0" 0 0
    	InputDevice    "Mouse0" "CorePointer"
    	InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    
    Section "Files"
    	ModulePath   "/usr/lib/xorg/modules/updates"
    	ModulePath   "/usr/lib/xorg/modules"
    	FontPath     "/usr/share/fonts/misc:unscaled"
    	FontPath     "/usr/share/fonts/TTF/"
    	FontPath     "/usr/share/fonts/OTF/"
    	FontPath     "/usr/share/fonts/Type1/"
    	FontPath     "/usr/share/fonts/100dpi:unscaled"
    	FontPath     "/usr/share/fonts/75dpi:unscaled"
    	FontPath     "/usr/share/fonts/URW/"
    	FontPath     "/usr/share/fonts/cyrillic:unscaled"
    	FontPath     "/usr/share/fonts/misc/sgi:unscaled"
    	FontPath     "/usr/share/fonts/truetype/"
    EndSection
    
    Section "Module"
    	Load  "glx"
    	Load  "dbe"
    	Load  "dri"
    	Load  "record"
    	Load  "dri2"
    	Load  "vnc"
    	Load  "extmod"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Keyboard0"
    	Driver      "kbd"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "auto"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "ZAxisMapping" "4 5 6 7"
    EndSection
    
    Section "Monitor"
    	Identifier   "Monitor0"
    	VendorName   "Monitor Vendor"
    	ModelName    "Monitor Model"
    EndSection
    
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
            ### <percent>: "<f>%"
            ### [arg]: arg optional
            #Option     "NoAccel"            	# [<bool>]
            #Option     "SWcursor"           	# [<bool>]
            #Option     "ColorKey"           	# <i>
            #Option     "CacheLines"         	# <i>
            #Option     "Dac6Bit"            	# [<bool>]
            #Option     "DRI"                	# [<bool>]
            #Option     "NoDDC"              	# [<bool>]
            #Option     "ShowCache"          	# [<bool>]
            #Option     "XvMCSurfaces"       	# <i>
            #Option     "PageFlip"           	# [<bool>]
    	Identifier  "Card0"
    	Driver      "intellegacy"
    	BusID       "PCI:0:2:0"
    EndSection
    
    Section "Screen"
    	Identifier "Screen0"
    	Device     "Card0"
    	Monitor    "Monitor0"
    	SubSection "Display"
    		Viewport   0 0
    		Depth     1
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     4
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     8
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     15
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     16
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
     
  7. #6 marcellus, 30.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
  8. #7 Subsurf, 30.07.2011
    Zuletzt bearbeitet: 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Also, wie ich grad gesehen hab hat "X -configure" nur eine xorg.conf im /root-Verzeichnis angelegt, im /etc/X11-Verzeichnis war weiterhin keine vorhanden (nur ein Ordner namens xorg.conf.d), daher hab ich dort nun manuell eine xorg.conf mit dem Inhalt aus deiner Dropbox angelegt.

    Leider keine Veränderung, bin auch nicht sicher ob das Erstellen der Datei überhaupt was gebracht hat.
    Aber der X-Desktop von SuSE scheint wirklich Probleme zu haben, das ist mir schon bei der Installation aufgefallen. Während der Konfiguration der Installation (also bei der Partitionierung, Paketauswahl usw.) war alles in Ordnung, beim Konfigurationsbildschirm nach dem Kopieren der Dateien bildeten sich aber "Schlieren" bzw. "Geisterbilder" neben Logos, Text und dem Mauszeiger und das ist so geblieben. Debian und Linux Mint haben die Probleme wie gesagt nicht...
     
  9. #8 marcellus, 30.07.2011
    Zuletzt bearbeitet: 30.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
    Was sie sich bei dem ganzen xorg.conf.d zeug gedacht haben bleibt mir ein Rätsel. Probieren wirs mit

    Code:
     Xorg -config /root/xorg.conf 
    E: wunder dich nicht, das startet normal eine minimal X session mit twm und 3 xterms, es geht nur darum, ob dein bug auftritt, oder nicht.
     
  10. #9 Subsurf, 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Die /root/xorg.conf enthält deinen per Dropbox geposteten Text. Folgende Ausgabe liefert mir "Xorg -config /root/xorg.conf". Gnome läuft danach immernoch nicht.

    Code:
    server:~ # Xorg -config /root/xorg.conf
    
    X.Org X Server 1.9.3
    Release Date: 2010-12-13
    X Protocol Version 11, Revision 0
    Build Operating System: openSUSE SUSE LINUX
    Current Operating System: Linux server 2.6.37.1-1.2-default #1 SMP 2011-02-21 10:34:10 +0100 i686
    Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1 splash=silent quiet vga=0x31a
    Build Date: 22 February 2011  10:15:34PM
    
    Current version of pixman: 0.20.0
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 30 17:33:31 2011
    (++) Using config file: "/root/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) LoadModule: Module vnc does not have a vncModuleData data object.
    (EE) Failed to load module "vnc" (invalid module, 0)
    (EE) intel(0): Detected a hung GPU, disabling acceleration.
    
     
  11. #10 marcellus, 30.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
    Die ausgae ist auch schlecht, was mich eher stört ist, dass "disabling acceleration" kein Grund dafür ist den X server komplett abzudrehen, probiers mit

    http://paste.pocoo.org/raw/449426/

    mich wunderts auch, dass die vom X server erstellte konfiguration ein vnc modul beinhaltet, aber du anscheinend keinen vnc support installiert hast.
     
  12. #11 Subsurf, 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Neuer Versuch:

    Code:
    server:~ # Xorg -config /root/xorg.conf
    
    X.Org X Server 1.9.3
    Release Date: 2010-12-13
    X Protocol Version 11, Revision 0
    Build Operating System: openSUSE SUSE LINUX
    Current Operating System: Linux server 2.6.37.1-1.2-default #1 SMP 2011-02-21 10:34:10 +0100 i686
    Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1 splash=silent quiet vga=0x31a
    Build Date: 22 February 2011  10:15:34PM
    
    Current version of pixman: 0.20.0
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 30 18:14:43 2011
    (++) Using config file: "/root/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Dennoch bleibt der Bildschirm bei der grafischen Ansicht schwarz...
     
  13. #12 marcellus, 30.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
    Was steht jetzt in deinem /var/log/Xorg.0.log ?
     
  14. #13 Subsurf, 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Xorg.0.log sagt:

    Code:
    [    31.378] 
    X.Org X Server 1.9.3
    Release Date: 2010-12-13
    [    31.378] X Protocol Version 11, Revision 0
    [    31.378] Build Operating System: openSUSE SUSE LINUX
    [    31.378] Current Operating System: Linux server 2.6.37.1-1.2-default #1 SMP 2011-02-21 10:34:10 +0100 i686
    [    31.378] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP0411N_S01JJ60X877678-part1 splash=silent quiet vga=0x31a
    [    31.378] Build Date: 22 February 2011  10:15:34PM
    [    31.378]  
    [    31.378] Current version of pixman: 0.20.0
    [    31.378] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    31.378] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    31.378] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 30 18:37:00 2011
    [    31.379] (==) Using config file: "/etc/X11/xorg.conf"
    [    31.379] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [    31.388] (==) No Layout section.  Using the first Screen section.
    [    31.388] (**) |-->Screen "Screen0" (0)
    [    31.388] (**) |   |-->Monitor "Monitor0"
    [    31.388] (**) |   |-->Device "Card0"
    [    31.388] (==) Automatically adding devices
    [    31.388] (==) Automatically enabling devices
    [    31.389] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [    31.389] 	Entry deleted from font path.
    [    31.389] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [    31.389] 	Entry deleted from font path.
    [    31.396] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [    31.396] 	Entry deleted from font path.
    [    31.396] (==) FontPath set to:
    	/usr/share/fonts/misc:unscaled,
    	/usr/share/fonts/Type1/,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/URW/,
    	/usr/share/fonts/cyrillic:unscaled,
    	/usr/share/fonts/truetype/
    [    31.396] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [    31.396] (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    31.396] (II) Loader magic: 0x8237b00
    [    31.396] (II) Module ABI versions:
    [    31.396] 	X.Org ANSI C Emulation: 0.4
    [    31.396] 	X.Org Video Driver: 8.0
    [    31.396] 	X.Org XInput driver : 11.0
    [    31.396] 	X.Org Server Extension : 4.0
    [    31.397] (--) PCI:*(0:0:2:0) 8086:2562:1734:1003 rev 1, Mem @ 0xd8000000/134217728, 0xd0000000/524288
    [    31.404] (II) Open ACPI successful (/var/run/acpid.socket)
    [    31.404] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [    31.404] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [    31.404] (II) "glx" will be loaded by default.
    [    31.404] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [    31.404] (II) "dri" will be loaded by default.
    [    31.404] (II) "dri2" will be loaded by default.
    [    31.404] (II) LoadModule: "dbe"
    [    31.407] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    31.407] (II) Module dbe: vendor="X.Org Foundation"
    [    31.407] 	compiled for 1.9.3, module version = 1.0.0
    [    31.407] 	Module class: X.Org Server Extension
    [    31.407] 	ABI class: X.Org Server Extension, version 4.0
    [    31.407] (II) Loading extension DOUBLE-BUFFER
    [    31.407] (II) LoadModule: "record"
    [    31.417] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    31.418] (II) Module record: vendor="X.Org Foundation"
    [    31.418] 	compiled for 1.9.3, module version = 1.13.0
    [    31.418] 	Module class: X.Org Server Extension
    [    31.418] 	ABI class: X.Org Server Extension, version 4.0
    [    31.418] (II) Loading extension RECORD
    [    31.418] (II) LoadModule: "vnc"
    [    31.424] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [    31.425] (EE) LoadModule: Module vnc does not have a vncModuleData data object.
    [    31.425] (II) UnloadModule: "vnc"
    [    31.425] (II) Unloading /usr/lib/xorg/modules/extensions/libvnc.so
    [    31.425] (EE) Failed to load module "vnc" (invalid module, 0)
    [    31.425] (II) LoadModule: "extmod"
    [    31.427] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    31.432] (II) Module extmod: vendor="X.Org Foundation"
    [    31.432] 	compiled for 1.9.3, module version = 1.0.0
    [    31.432] 	Module class: X.Org Server Extension
    [    31.432] 	ABI class: X.Org Server Extension, version 4.0
    [    31.432] (II) Loading extension MIT-SCREEN-SAVER
    [    31.432] (II) Loading extension XFree86-VidModeExtension
    [    31.432] (II) Loading extension XFree86-DGA
    [    31.432] (II) Loading extension DPMS
    [    31.432] (II) Loading extension XVideo
    [    31.432] (II) Loading extension XVideo-MotionCompensation
    [    31.432] (II) Loading extension X-Resource
    [    31.432] (II) LoadModule: "glx"
    [    31.434] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    31.435] (II) Module glx: vendor="X.Org Foundation"
    [    31.435] 	compiled for 1.9.3, module version = 1.0.0
    [    31.435] 	ABI class: X.Org Server Extension, version 4.0
    [    31.435] (==) AIGLX enabled
    [    31.435] (II) Loading extension GLX
    [    31.435] (II) LoadModule: "dri"
    [    31.440] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    31.441] (II) Module dri: vendor="X.Org Foundation"
    [    31.441] 	compiled for 1.9.3, module version = 1.0.0
    [    31.441] 	ABI class: X.Org Server Extension, version 4.0
    [    31.441] (II) Loading extension XFree86-DRI
    [    31.441] (II) LoadModule: "dri2"
    [    31.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    31.443] (II) Module dri2: vendor="X.Org Foundation"
    [    31.443] 	compiled for 1.9.3, module version = 1.2.0
    [    31.443] 	ABI class: X.Org Server Extension, version 4.0
    [    31.443] (II) Loading extension DRI2
    [    31.443] (II) LoadModule: "intel"
    [    31.449] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [    31.450] (II) Module intel: vendor="X.Org Foundation"
    [    31.450] 	compiled for 1.9.3, module version = 2.14.0
    [    31.450] 	Module class: X.Org Video Driver
    [    31.450] 	ABI class: X.Org Video Driver, version 8.0
    [    31.450] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    	Sandybridge, Sandybridge
    [    31.451] (++) using VT number 8
    
    [    31.475] drmOpenDevice: node name is /dev/dri/card0
    [    31.475] drmOpenDevice: open result is 9, (OK)
    [    31.475] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [    31.475] drmOpenDevice: node name is /dev/dri/card0
    [    31.475] drmOpenDevice: open result is 9, (OK)
    [    31.475] drmOpenByBusid: drmOpenMinor returns 9
    [    31.476] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [    31.476] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [    31.476] (==) intel(0): RGB weight 888
    [    31.476] (==) intel(0): Default visual is TrueColor
    [    31.476] (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
    [    31.476] (--) intel(0): Chipset: "845G"
    [    31.476] (**) intel(0): Tiling enabled
    [    31.476] (**) intel(0): SwapBuffers wait enabled
    [    31.476] (==) intel(0): video overlay key set to 0x101fe
    [    31.595] (II) intel(0): Output VGA1 using monitor section Monitor0
    [    31.744] (II) intel(0): EDID for output VGA1
    [    31.744] (II) intel(0): Manufacturer: ACR  Model: 1a9  Serial#: 54621579
    [    31.744] (II) intel(0): Year: 2010  Week: 34
    [    31.744] (II) intel(0): EDID Version: 1.3
    [    31.744] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    [    31.744] (II) intel(0): Sync:  Separate
    [    31.744] (II) intel(0): Max Image Size [cm]: horiz.: 48  vert.: 27
    [    31.744] (II) intel(0): Gamma: 2.20
    [    31.744] (II) intel(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
    [    31.744] (II) intel(0): First detailed timing is preferred mode
    [    31.744] (II) intel(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
    [    31.744] (II) intel(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
    [    31.744] (II) intel(0): Supported established timings:
    [    31.744] (II) intel(0): 720x400@70Hz
    [    31.744] (II) intel(0): 640x480@60Hz
    [    31.744] (II) intel(0): 640x480@67Hz
    [    31.744] (II) intel(0): 800x600@56Hz
    [    31.744] (II) intel(0): 800x600@60Hz
    [    31.744] (II) intel(0): 1024x768@60Hz
    [    31.744] (II) intel(0): 1024x768@70Hz
    [    31.744] (II) intel(0): 1280x1024@75Hz
    [    31.744] (II) intel(0): Manufacturer's mask: 0
    [    31.744] (II) intel(0): Supported standard timings:
    [    31.744] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
    [    31.744] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    [    31.744] (II) intel(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
    [    31.744] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
    [    31.744] (II) intel(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
    [    31.745] (II) intel(0): Supported detailed timing:
    [    31.745] (II) intel(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
    [    31.745] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
    [    31.745] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
    [    31.745] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
    [    31.745] (II) intel(0): Monitor name: S221HQL
    [    31.745] (II) intel(0): Serial No: LP20D0068531
    [    31.745] (II) intel(0): EDID (in hex):
    [    31.745] (II) intel(0): 	00ffffffffffff000472a9018b754103
    [    31.745] (II) intel(0): 	2214010368301b78ca3585a656489a24
    [    31.745] (II) intel(0): 	125054b30d00714f818081009500d1c0
    [    31.745] (II) intel(0): 	010101010101023a801871382d40582c
    [    31.745] (II) intel(0): 	4500dd0c1100001e000000fd00384c1f
    [    31.745] (II) intel(0): 	5311000a202020202020000000fc0053
    [    31.745] (II) intel(0): 	32323148514c0a2020202020000000ff
    [    31.745] (II) intel(0): 	004c50323044303036383533310a0015
    [    31.745] (II) intel(0): EDID vendor "ACR", prod id 425
    [    31.745] (II) intel(0): Using EDID range info for horizontal sync
    [    31.745] (II) intel(0): Using EDID range info for vertical refresh
    [    31.745] (II) intel(0): Printing DDC gathered Modelines:
    [    31.745] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    31.745] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    31.745] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    31.745] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    31.745] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    31.745] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    31.745] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    31.745] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    31.745] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    31.745] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    31.745] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    31.745] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    31.745] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    31.745] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    31.745] (II) intel(0): Printing probed modes for output VGA1
    [    31.745] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    31.745] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    31.745] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    31.745] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    31.745] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz)
    [    31.746] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    31.746] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    31.746] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    31.746] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    31.746] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    31.746] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    31.746] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    31.746] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    31.746] (II) intel(0): Output VGA1 connected
    [    31.746] (II) intel(0): Using exact sizes for initial modes
    [    31.746] (II) intel(0): Output VGA1 using initial mode 1920x1080
    [    31.746] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [    31.746] (II) intel(0): Kernel page flipping support detected, enabling
    [    31.746] (**) intel(0): Display dimensions: (480, 270) mm
    [    31.746] (**) intel(0): DPI set to (101, 101)
    [    31.746] (II) Loading sub module "fb"
    [    31.746] (II) LoadModule: "fb"
    [    31.747] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    31.747] (II) Module fb: vendor="X.Org Foundation"
    [    31.747] 	compiled for 1.9.3, module version = 1.0.0
    [    31.747] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    31.747] (==) Depth 24 pixmap format is 32 bpp
    [    31.747] (==) intel(0): VideoRam: 131072 KB
    [    31.747] (II) intel(0): [DRI2] Setup complete
    [    31.747] (II) intel(0): [DRI2]   DRI driver: i915
    [    31.747] (WW) intel(0): Failed to set tiling on frontbuffer.
    [    31.747] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
    [    31.757] (II) UXA(0): Driver registered support for the following operations:
    [    31.757] (II)         solid
    [    31.757] (II)         copy
    [    31.757] (II)         composite (RENDER acceleration)
    [    31.757] (II)         put_image
    [    31.757] (II)         get_image
    [    31.757] (==) intel(0): Backing store disabled
    [    31.757] (==) intel(0): Silken mouse enabled
    [    31.757] (II) intel(0): Initializing HW Cursor
    [    31.757] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [    31.818] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    31.818] (==) intel(0): DPMS enabled
    [    31.818] (==) intel(0): Intel XvMC decoder disabled
    [    31.818] (II) intel(0): Set up overlay video
    [    31.818] (II) intel(0): direct rendering: DRI2 Enabled
    [    31.818] (WW) intel(0): Option "NoAccel" is not used
    [    31.818] (--) RandR disabled
    [    31.818] (II) Initializing built-in extension Generic Event Extension
    [    31.818] (II) Initializing built-in extension SHAPE
    [    31.818] (II) Initializing built-in extension MIT-SHM
    [    31.818] (II) Initializing built-in extension XInputExtension
    [    31.818] (II) Initializing built-in extension XTEST
    [    31.818] (II) Initializing built-in extension BIG-REQUESTS
    [    31.818] (II) Initializing built-in extension SYNC
    [    31.818] (II) Initializing built-in extension XKEYBOARD
    [    31.818] (II) Initializing built-in extension XC-MISC
    [    31.818] (II) Initializing built-in extension SECURITY
    [    31.818] (II) Initializing built-in extension XINERAMA
    [    31.818] (II) Initializing built-in extension XFIXES
    [    31.818] (II) Initializing built-in extension RENDER
    [    31.818] (II) Initializing built-in extension RANDR
    [    31.818] (II) Initializing built-in extension COMPOSITE
    [    31.818] (II) Initializing built-in extension DAMAGE
    [    31.855] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    31.855] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    31.855] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    31.855] (II) AIGLX: enabled GLX_SGI_make_current_read
    [    31.855] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    31.855] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
    [    31.855] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    31.859] (II) intel(0): Setting screen physical size to 507 x 285
    [    31.943] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    31.950] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
    [    31.982] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [    31.982] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    31.982] (**) Power Button: Applying InputClass "LocalKeyboard"
    [    31.982] (II) LoadModule: "evdev"
    [    31.984] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    31.985] (II) Module evdev: vendor="X.Org Foundation"
    [    31.985] 	compiled for 1.9.3, module version = 2.6.0
    [    31.985] 	Module class: X.Org XInput Driver
    [    31.985] 	ABI class: X.Org XInput driver, version 11.0
    [    31.985] (**) Power Button: always reports core events
    [    31.985] (**) Power Button: Device: "/dev/input/event2"
    [    31.985] (--) Power Button: Found keys
    [    31.985] (II) Power Button: Configuring as keyboard
    [    31.985] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    31.985] (**) Option "xkb_rules" "evdev"
    [    31.985] (**) Option "xkb_model" "evdev"
    [    31.985] (**) Option "xkb_layout" "de"
    [    31.985] (**) Option "xkb_variant" "nodeadkeys"
    [    31.989] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-90BEB0384DFE894FC6C76430E8611BB0119B95EE.xkm
    [    31.995] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    31.995] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    31.995] (**) Power Button: Applying InputClass "LocalKeyboard"
    [    31.995] (**) Power Button: always reports core events
    [    31.995] (**) Power Button: Device: "/dev/input/event1"
    [    31.995] (--) Power Button: Found keys
    [    31.995] (II) Power Button: Configuring as keyboard
    [    31.995] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    31.996] (**) Option "xkb_rules" "evdev"
    [    31.996] (**) Option "xkb_model" "evdev"
    [    31.996] (**) Option "xkb_layout" "de"
    [    31.996] (**) Option "xkb_variant" "nodeadkeys"
    [    31.999] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event3)
    [    31.999] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [    31.999] (**) Logitech USB Gaming Mouse: always reports core events
    [    31.999] (**) Logitech USB Gaming Mouse: Device: "/dev/input/event3"
    [    31.999] (--) Logitech USB Gaming Mouse: Found 20 mouse buttons
    [    31.999] (--) Logitech USB Gaming Mouse: Found scroll wheel(s)
    [    31.999] (--) Logitech USB Gaming Mouse: Found relative axes
    [    31.999] (--) Logitech USB Gaming Mouse: Found x and y relative axes
    [    31.999] (II) Logitech USB Gaming Mouse: Configuring as mouse
    [    31.999] (II) Logitech USB Gaming Mouse: Adding scrollwheel support
    [    32.000] (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
    [    32.000] (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    32.000] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
    [    32.000] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
    [    32.000] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
    [    32.000] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
    [    32.000] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
    [    32.000] (II) Logitech USB Gaming Mouse: initialized for relative axes.
    [    32.001] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse0)
    [    32.001] (II) No input driver/identifier specified (ignoring)
    [    32.014] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [    32.014] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    32.014] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
    [    32.014] (**) AT Translated Set 2 keyboard: always reports core events
    [    32.015] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [    32.015] (--) AT Translated Set 2 keyboard: Found keys
    [    32.015] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [    32.015] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [    32.015] (**) Option "xkb_rules" "evdev"
    [    32.015] (**) Option "xkb_model" "evdev"
    [    32.015] (**) Option "xkb_layout" "de"
    [    32.015] (**) Option "xkb_variant" "nodeadkeys"
    [    32.016] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [    32.016] (II) No input driver/identifier specified (ignoring)
    [    32.044] (EE) intel(0): failed to set cursor: Input/output error
    [    32.045] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    32.075] (EE) intel(0): failed to set cursor: Input/output error
    [    32.090] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-C37DE65A5B365D52A52EC1F2CB656087341C7EF8.xkm
    [    32.105] (EE) intel(0): failed to set cursor: Input/output error
    [    32.135] (EE) intel(0): failed to set cursor: Input/output error
    [    32.166] (EE) intel(0): failed to set cursor: Input/output error
    [    32.197] (EE) intel(0): failed to set cursor: Input/output error
    [    32.227] (EE) intel(0): failed to set cursor: Input/output error
    [    32.257] (EE) intel(0): failed to set cursor: Input/output error
    [    32.287] (EE) intel(0): failed to set cursor: Input/output error
    [    32.318] (EE) intel(0): failed to set cursor: Input/output error
    [    32.348] (EE) intel(0): failed to set cursor: Input/output error
    [    32.378] (EE) intel(0): failed to set cursor: Input/output error
    [    32.408] (EE) intel(0): failed to set cursor: Input/output error
    [    32.438] (EE) intel(0): failed to set cursor: Input/output error
    [    32.469] (EE) intel(0): failed to set cursor: Input/output error
    [    32.499] (EE) intel(0): failed to set cursor: Input/output error
    [    32.529] (EE) intel(0): failed to set cursor: Input/output error
    [    32.559] (EE) intel(0): failed to set cursor: Input/output error
    [    32.589] (EE) intel(0): failed to set cursor: Input/output error
    [    32.620] (EE) intel(0): failed to set cursor: Input/output error
    [    32.650] (EE) intel(0): failed to set cursor: Input/output error
    [    32.680] (EE) intel(0): failed to set cursor: Input/output error
    [    32.710] (EE) intel(0): failed to set cursor: Input/output error
    [    32.740] (EE) intel(0): failed to set cursor: Input/output error
    [    32.770] (EE) intel(0): failed to set cursor: Input/output error
    [    32.913] (II) intel(0): EDID vendor "ACR", prod id 425
    [    32.914] (II) intel(0): Using hsync ranges from config file
    [    32.914] (II) intel(0): Using vrefresh ranges from config file
    [    32.914] (II) intel(0): Printing DDC gathered Modelines:
    [    32.914] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    32.914] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    32.914] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    32.914] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    32.914] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    32.914] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    32.914] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    32.914] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    32.914] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    32.914] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    32.914] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    32.914] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    32.914] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    32.914] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    32.921] (EE) intel(0): failed to set cursor: Input/output error
    [    33.064] (II) intel(0): EDID vendor "ACR", prod id 425
    [    33.065] (II) intel(0): Using hsync ranges from config file
    [    33.065] (II) intel(0): Using vrefresh ranges from config file
    [    33.065] (II) intel(0): Printing DDC gathered Modelines:
    [    33.065] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    33.065] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    33.065] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.065] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    33.065] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.065] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    33.065] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    33.065] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    33.065] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.065] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    33.065] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    33.065] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    33.065] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    33.065] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    33.066] (EE) intel(0): failed to set cursor: Input/output error
    [    33.186] (II) intel(0): EDID vendor "ACR", prod id 425
    [    33.187] (II) intel(0): Using hsync ranges from config file
    [    33.187] (II) intel(0): Using vrefresh ranges from config file
    [    33.187] (II) intel(0): Printing DDC gathered Modelines:
    [    33.187] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    33.187] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    33.187] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.187] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    33.187] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.187] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    33.187] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    33.187] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    33.187] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.187] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    33.187] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    33.187] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    33.187] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    33.187] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    33.188] (EE) intel(0): failed to set cursor: Input/output error
    [    33.322] (II) intel(0): EDID vendor "ACR", prod id 425
    [    33.322] (II) intel(0): Using hsync ranges from config file
    [    33.322] (II) intel(0): Using vrefresh ranges from config file
    [    33.322] (II) intel(0): Printing DDC gathered Modelines:
    [    33.322] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [    33.322] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    33.322] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.322] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
    [    33.322] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.322] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    33.322] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    33.322] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
    [    33.322] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.323] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    33.323] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    33.323] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
    [    33.323] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    [    33.323] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    [    33.323] (EE) intel(0): failed to set cursor: Input/output error
    [    33.354] (EE) intel(0): failed to set cursor: Input/output error
    [    33.384] (EE) intel(0): failed to set cursor: Input/output error
    [    33.415] (EE) intel(0): failed to set cursor: Input/output error
    [    33.444] (EE) intel(0): failed to set cursor: Input/output error
    [    33.474] (EE) intel(0): failed to set cursor: Input/output error
    [    33.505] (EE) intel(0): failed to set cursor: Input/output error
    [    33.534] (EE) intel(0): failed to set cursor: Input/output error
    [    33.564] (EE) intel(0): failed to set cursor: Input/output error
    [    33.594] (EE) intel(0): failed to set cursor: Input/output error
    [    33.624] (EE) intel(0): failed to set cursor: Input/output error
    [    33.654] (EE) intel(0): failed to set cursor: Input/output error
    [    33.684] (EE) intel(0): failed to set cursor: Input/output error
    [    33.714] (EE) intel(0): failed to set cursor: Input/output error
    [    33.745] (EE) intel(0): failed to set cursor: Input/output error
    [    33.775] (EE) intel(0): failed to set cursor: Input/output error
    [    33.805] (EE) intel(0): failed to set cursor: Input/output error
    [    33.813] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-C37DE65A5B365D52A52EC1F2CB656087341C7EF8.xkm
    [    33.836] (EE) intel(0): failed to set cursor: Input/output error
    [    33.838] (EE) intel(0): failed to set cursor: Input/output error
    [    34.160] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    34.264] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    35.739] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    35.800] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    35.845] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-7ECCED5E58CE3E30BB651C618F4D5CE9994754CA.xkm
    [    36.839] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.859] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.877] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.883] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.883] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.899] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.901] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.911] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.947] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.947] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    36.993] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.052] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.053] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.060] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.060] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.104] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.115] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.255] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.255] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.275] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.293] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.295] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.299] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.300] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.303] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.307] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.311] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.371] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.373] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.376] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.379] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.379] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.413] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.446] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.546] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.581] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.615] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.661] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.719] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.753] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.787] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.827] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.886] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.920] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.954] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    37.990] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.047] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.086] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.120] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.154] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.212] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.285] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.319] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.375] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.416] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.417] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.426] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.427] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.430] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.432] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    38.441] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [    91.056] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   151.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   211.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   261.586] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   271.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   331.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   391.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   451.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   486.927] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   511.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   571.065] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   631.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   691.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   712.273] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   751.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   811.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   871.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   931.014] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   937.613] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [   991.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1051.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1111.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1162.958] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1171.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1231.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1291.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1351.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1388.300] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1411.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1471.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1531.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1591.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1613.643] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1651.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1711.017] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1771.034] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1831.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1838.986] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1891.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  1951.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2011.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2064.326] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2071.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2131.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2191.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2251.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2289.668] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2311.063] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2371.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2431.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2491.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2515.010] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [  2551.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    
    Kann sein dass er irgendwo sagt die xorg.conf wäre /home/user/xorg.conf gewesen. Damit ichs per ftp einfacher rüberziehen kann hab ich das nämlich so gelöst grade.
     
  15. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  16. #14 marcellus, 30.07.2011
    marcellus

    marcellus Kaiser

    Dabei seit:
    09.05.2007
    Beiträge:
    1.392
    Zustimmungen:
    0
    Er sagt am Anfang des Logs

    Code:
    [    31.379] (==) Using config file: "/etc/X11/xorg.conf"
    [    31.379] (==) Using config directory: "/etc/X11/xorg.conf.d"
    Sprich, das ist nich die xorg.conf, die du eingestellt hast. Anscheinend will er das logfile auch händisch angegeben haben, also auf ein neues

    Code:
    Xorg -config /home/user/xorg.conf -logfige /home/user/xorg.log
    und post /home/user/xorg.log

    aber das wird mühsam, willst du mich nicht per ssh auf die Kiste lassen?
     
  17. #15 Subsurf, 30.07.2011
    Subsurf

    Subsurf Jungspund

    Dabei seit:
    29.07.2011
    Beiträge:
    10
    Zustimmungen:
    0
    Ist wohl die einfachste Methode, aber wird grade schwierig. Mein ISP hat mal wieder Schwierigkeiten und ich kämpfe grade mit andauernden Verbindungsabbrüchen. Die Zugangsdaten kann ich dir dennoch per PN schicken.
     
Thema:

Gnome hängt sich nach boot anscheinend auf

Die Seite wird geladen...

Gnome hängt sich nach boot anscheinend auf - Ähnliche Themen

  1. Gnome Bootup hängt

    Gnome Bootup hängt: Gute Morgen, meine Probleme reißen nicht ab :-) Ich benutze Gnome / Xgl / Compiz. Der Bootvorgang funktioniert einwandfrei, der XServer wird...
  2. soundapplet unter gnome hängt auch

    soundapplet unter gnome hängt auch: Ok ich weiß ich nerv , aber das hier nervt auch. Mein Gnome applet für den Sound funktioniert nicht richtig. Das steht immer auf Null und...
  3. gnome hängt nach neuinstallation

    gnome hängt nach neuinstallation: Moin , mein Gnome hängt etwas. Jedesmal beim hochfahren dauert es mindestens ne Minuten bis sich endlich ein Bild aufbaut. Ab dem GDM login...
  4. centos & Gnome autostart

    centos & Gnome autostart: Hi zusammen, ich würde gerne nach dem Start von CentOS + Gnome ein von mir geschriebenes Script ausführen (lassen). im Idealfall würde ich gerne...
  5. Gnome ohne Systemd bei Gentoo und Funtoo

    Gnome ohne Systemd bei Gentoo und Funtoo: Das GitHub-Projekt »GNOME Without Systemd« will für Gentoo und dessen Derivat Funtoo die Möglichkeit bieten, die Desktopumgebung Gnome ohne...