boot manager verschieben.

Dieses Thema im Forum "SuSE / OpenSuSE" wurde erstellt von -Jedi-, 09.07.2007.

  1. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    meine platte ließ sich nicht partitionieren. deshalb hab ich suse auf ner externen installieren müssn. jetzt brauch ich die externe immer, wenn ich den pc einschalten will, weil der boot manager wo man das betriebssystem auswählt, auf der externen ist.
    ohne ext. kommt immer "grub loading... error 21"
    kann ich irgendwie irgendwo einstellen, dass ohne ext. platte windows automatisch gebootet wird?
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. reni

    reni Guest

    Du könntest /boot auf eine extra Partition der internen Platte schaffen.
    Dann sollte zumindest Grub auch ohne die externe Platte funktionieren.
     
  4. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    ne extra partition?
    da is das problem. die platte lässt sich ned partitionieren.
     
  5. #4 gropiuskalle, 09.07.2007
    gropiuskalle

    gropiuskalle terra incognita

    Dabei seit:
    01.07.2006
    Beiträge:
    4.857
    Zustimmungen:
    0
    Ort:
    Berlin
    Wieso denn nicht (fragt sich jetzt der eine oder andere)?
     
  6. reni

    reni Guest

    Versuch es damit:
    http://gparted.sourceforge.net/livecd.php
     
  7. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    also, mit gparted hab ichs ja versucht ^^
    immer errors. und die externe zu partitionieren war kein problem.
     
  8. reni

    reni Guest

    Mit diesen konkreten Fehlermeldungen kann dir keiner weiterhelfen ;)
     
  9. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    ich weis, aba ich kenn die meldungen nimmer. als ich von der suse dvd partitionieren wollte gings ja auch nicht.
    auber komischerweise nur bei der eingebauten platte.
     
  10. #9 gropiuskalle, 09.07.2007
    gropiuskalle

    gropiuskalle terra incognita

    Dabei seit:
    01.07.2006
    Beiträge:
    4.857
    Zustimmungen:
    0
    Ort:
    Berlin
    Hilft ja nix - probier's nochmal und poste die Fehlermeldungen.
     
  11. rikola

    rikola Foren Gott

    Dabei seit:
    23.08.2005
    Beiträge:
    2.133
    Zustimmungen:
    0
    Wird interne die Platte ueberhaupt erkannt nach der Installation? Ich koennte mir vorstellen, dass der Fehler daran liegt, dass der Rechner einen Controller hat, der von Linux nicht unterstuetzt wird (SATA-II?). Da bringt Dir dann auch grub nichts mehr - vielleicht ist eine Option, eine zweite interne Platte einzubauen?
     
  12. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    ich hab zwar jetzt nicht alles verstanden aba:
    ich kann von linux aus auf meine interne platte zugreifen.
     
  13. rikola

    rikola Foren Gott

    Dabei seit:
    23.08.2005
    Beiträge:
    2.133
    Zustimmungen:
    0
    Du hast zumindest richtig geantwortet ;-)

    Wenn Du von der USB-Platte aus bootest, wird die Interne Platte vermutlich als /dev/sda oder /dev/hda angesprochen.

    Koenntest Du mal die Ausgabe von
    Code:
    fdisk -l
    
    hier posten? Achte darauf, dass Du den Befehl als root ausfuehrst. Ausserdem waere die Ausgabe von dmesg hilfreicht. Die Ausgabe kannst Du mit
    Code:
    dmesg > dmesg.log
    
    in eine Datei umleiten und dann dmesg.log hier posten.
     
  14. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    bei fdisk -l
    kommt:
    Code:
    jedi@linux-6e1u:~> fdisk -l
    bash: fdisk: command not found
    das log zeug is a bissi lang:
    Code:
    Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
     BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
     BIOS-e820: 000000003fe70000 - 000000003fe86000 (ACPI data)
     BIOS-e820: 000000003fe86000 - 000000003ff00000 (ACPI NVS)
     BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
     BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
     BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
     BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    126MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f65d0
    On node 0 totalpages: 261744
      DMA zone: 4096 pages, LIFO batch:0
      Normal zone: 225280 pages, LIFO batch:31
      HighMem zone: 32368 pages, LIFO batch:7
    DMI present.
    Using APIC driver default
    IO/L-APIC allowed because system is MP or new enough
    ACPI: RSDP (v000 TOSINV                                ) @ 0x000f6520
    ACPI: RSDT (v001 TOSINV Capell00 0x06040000  LTP 0x00000000) @ 0x3fe7e29d
    ACPI: FADT (v001 TOSINV CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe85dee
    ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe85e62
    ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe85eca
    ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3fe85f02
    ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3fe85fd8
    ACPI: MADT (v001 TOSINV   APIC   0x06040000  LTP 0x00000000) @ 0x3fe85f70
    ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x3fe7f2ff
    ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x3fe7ec6d
    ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x3fe7e2e5
    ACPI: DSDT (v001 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: 2 duplicate APIC table ignored.
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    Detected 1662.700 MHz processor.
    Built 1 zonelists.  Total pages: 261744
    Kernel command line: root=/dev/sdb6 vga=0x314 resume=/dev/sdb5 splash=silent elevator=
    bootsplash: silent mode.
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1030620k/1046976k available (1697k kernel code, 15684k reserved, 968k data, 196k init, 129472k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    Using HPET for base-timer
    Calibrating delay using timer specific routine.. 3329.27 BogoMIPS (lpj=6658553)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000940 0000c1a9 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    checking if image is initramfs... it is
    Freeing initrd memory: 3328k freed
    ACPI: Core revision 20060707
    CPU0: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3325.16 BogoMIPS (lpj=6650329)
    CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000940 0000c1a9 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
    Total of 2 processors activated (6654.44 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    migration_cost=63
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
    Boot video device is 0000:01:00.0
    PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
    PCI: Transparent bridge - 0000:00:1e.0
    PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses')
    Please report the result to linux-kernel to fix this permanently
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: Embedded Controller [EC0] (gpe 22) interrupt mode.
    ACPI: Power Resource [FN00] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    PnPBIOS: Disabled by ACPI PNP
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    PCI: Bridge: 0000:00:01.0
      IO window: 2000-2fff
      MEM window: dc000000-dc0fffff
      PREFETCH window: c8000000-cfffffff
    PCI: Bridge: 0000:00:1c.0
      IO window: disabled.
      MEM window: disabled.
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
      IO window: 3000-3fff
      MEM window: d8000000-d9ffffff
      PREFETCH window: d2000000-d3ffffff
    PCI: Bridge: 0000:00:1c.2
      IO window: 4000-4fff
      MEM window: da000000-dbffffff
      PREFETCH window: d4000000-d5ffffff
    PCI: Bus 8, cardbus bridge: 0000:07:06.0
      IO window: 00005400-000054ff
      IO window: 00005800-000058ff
      PREFETCH window: 50000000-51ffffff
      MEM window: 52000000-53ffffff
    PCI: Bridge: 0000:00:1e.0
      IO window: 5000-5fff
      MEM window: dc100000-dc1fffff
      PREFETCH window: 50000000-51ffffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 185
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Simple Boot Flag at 0x36 set to 0x1
    Machine check exception polling timer started.
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1184111921.616:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    vesafb: framebuffer at 0xc8000000, mapped to 0xf8880000, using 3750k, total 16384k
    vesafb: mode is 800x600x16, linelength=1600, pages=16
    vesafb: protected mode interface info at c000:abda
    vesafb: pmi: set display start = c00cac68, set palette = c00cad2a
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3).
    Console: switching to colour frame buffer device 96x33
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    NET: Registered protocol family 1
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S3 S4 S5)
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 196k freed
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SCSI subsystem initialized
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI: Invalid passive threshold
    ACPI: Transitioning device [FAN0] to D0
    ACPI: Transitioning device [FAN0] to D0
    ACPI: Unable to turn cooling device [dffe73d8] 'on'
    ACPI: Thermal Zone [TZ00] (27 C)
    ACPI: Thermal Zone [TZ01] (29 C)
    Time: hpet clocksource has been installed.
    libata version 2.00 loaded.
    ata_piix 0000:00:1f.2: version 2.00ac7
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
    synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
    input: SynPS/2 Synaptics TouchPad as /class/input/input2
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
    scsi0 : ata_piix
    ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
    ata1.00: ata1: dev 0 multi count 16
    ata1.00: configured for UDMA/100
    scsi1 : ata_piix
    ata2.00: ATAPI, max UDMA/33
    ata2.00: configured for UDMA/33
      Vendor: ATA       Model: HTS541080G9SA00   Rev: MB4O
      Type:   Direct-Access                      ANSI SCSI revision: 05
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
     sda: sda1 sda4
    sd 0:0:0:0: Attached scsi disk sda
      Vendor: HL-DT-ST  Model: DVDRAM GMA-4082N  Rev: HV02
      Type:   CD-ROM                             ANSI SCSI revision: 05
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    ACPI: Transitioning device [FAN0] to D3
    ACPI: Transitioning device [FAN0] to D3
    ACPI: Fan [FAN0] (off)
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 50, io mem 0xdc404000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Initializing USB Mass Storage driver...
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    usb 1-5: new device found, idVendor=04b4, idProduct=6830
    usb 1-5: new device strings: Mfr=56, Product=78, SerialNumber=100
    usb 1-5: Product: USB2.0 Storage Device
    usb 1-5: Manufacturer: Cypress Semiconductor
    usb 1-5: SerialNumber: DEF10BA5FEBD
    usb 1-5: configuration #1 chosen from 1 choice
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
      Vendor: SAMSUNG   Model: HD400LD           Rev: 0000
      Type:   Direct-Access                      ANSI SCSI revision: 00
    SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 27 00 00 00
    sdb: assuming drive cache: write through
    SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 27 00 00 00
    sdb: assuming drive cache: write through
     sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
    sd 2:0:0:0: Attached scsi disk sdb
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sdb6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    intel_rng: FWH not detected
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    USB Universal Host Controller Interface driver v3.0
    Linux agpgart interface v0.101 (c) Dave Jones
    hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
    [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0
    ieee1394: Initialized config rom entry `ip1394'
    sdhci: Secure Digital Host Controller Interface driver, 0.12
    sdhci: Copyright(c) Pierre Ossman
    ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:2121:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:2123:    hp=0x0, dig_out=0x0, din_in=0x0
    ALSA sound/pci/hda/hda_codec.c:2131:    inputs: mic=0xd, fmic=0x0, line=0xc, fline=0x0, cd=0x11, aux=0x0
    ieee80211_crypt: registered algorithm 'NULL'
    e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
    e100: Copyright(c) 1999-2005 Intel Corporation
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d
    ipw3945: Copyright(c) 2003-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 233
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 50, io base 0x00001800
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
    usb usb5: new device found, idVendor=0000, idProduct=0000
    usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    agpgart: Detected an Intel 945GM Chipset.
    agpgart: AGP aperture is 256M @ 0x0
    sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
    ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 185
    mmc0: SDHCI at 0xdc106800 irq 185 DMA
    ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
    ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 177
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[dc106000-dc1067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    usb 4-2: new low speed USB device using uhci_hcd and address 2
    ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 66
    e100: eth0: e100_probe: addr 0xdc105000, irq 66, MAC addr 00:A0:D1:33:58:D7
    Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
    Yenta: Enabling burst memory read transactions
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
    usb 4-2: new device found, idVendor=046d, idProduct=c01e
    usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-2: Product: USB-PS/2 Optical Mouse
    usb 4-2: Manufacturer: Logitech
    usb 4-2: configuration #1 chosen from 1 choice
    usbcore: registered new driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
    usbcore: registered new driver usbhid
    Yenta: ISA IRQ mask 0x0000, PCI irq 185
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
    pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
    cs: IO port probe 0x5000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0xdc100000 - 0xdc1fffff
    pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
    ipw3945: Radio Frequency Kill Switch is On:
    Kill switch must be turned off for wireless networking to work.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x400-0x407 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    Adding 1558264k swap on /dev/sdb5.  Priority:-1 extents:1 across:1558264k
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d13358d7]
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    loop: loaded (max 8 devices)
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sdb7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    NTFS driver 2.1.27 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
    NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
    NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    NTFS-fs warning (device sda1): load_system_files(): Windows is hibernated.  Will not be able to remount read-write.  Run chkdsk.
    NTFS volume version 3.1.
    NTFS-fs warning (device sdb1): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
    NTFS-fs warning (device sdb1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    AppArmor: AppArmor initialized
    audit(1184111948.001:2): AppArmor initialized
    
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (8179 buckets, 65432 max) - 228 bytes per conntrack
    ACPI: AC Adapter [ADP0] (off-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Power Button (CM) [PWRB]
    audit(1184104759.446:3): audit_pid=3437 old=0 by auid=4294967295
    IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    NET: Registered protocol family 17
    bootsplash: status on console 0 changed to on
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
    [fglrx] total      GART = 130023424
    [fglrx] free       GART = 114032640
    [fglrx] max single GART = 114032640
    [fglrx] total      LFB  = 134086656
    [fglrx] free       LFB  = 119697408
    [fglrx] max single LFB  = 119697408
    [fglrx] total      Inv  = 0
    [fglrx] free       Inv  = 0
    [fglrx] max single Inv  = 0
    [fglrx] total      TIM  = 0
    eth0: no IPv6 routers present
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=213.165.64.210 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31853 DF PROTO=TCP SPT=25224 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0002009C8A5999AF) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=213.165.64.210 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=40220 DF PROTO=TCP SPT=25336 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00022F2B87C892E5) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=213.165.64.210 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52221 DF PROTO=TCP SPT=25341 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00022F6087C892FA) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1250 DF PROTO=TCP SPT=27880 DPT=80 WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A00054910EF9AFF16) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10007 DF PROTO=TCP SPT=27878 DPT=80 WINDOW=716 RES=0x00 ACK FIN URGP=0 OPT (0101080A00054911EF9B245A) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1251 DF PROTO=TCP SPT=27880 DPT=80 WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A0005494CEF9AFF16) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10008 DF PROTO=TCP SPT=27878 DPT=80 WINDOW=716 RES=0x00 ACK FIN URGP=0 OPT (0101080A0005494CEF9B245A) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10009 DF PROTO=TCP SPT=27878 DPT=80 WINDOW=716 RES=0x00 ACK FIN URGP=0 OPT (0101080A000549C2EF9B245A) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10014 DF PROTO=TCP SPT=27878 DPT=80 WINDOW=716 RES=0x00 ACK FIN URGP=0 OPT (0101080A00056656EF9B245A) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10015 DF PROTO=TCP SPT=27878 DPT=80 WINDOW=716 RES=0x00 ACK FIN URGP=0 OPT (0101080A000583D6EF9B245A) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1258 DF PROTO=TCP SPT=27880 DPT=80 WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A000584D4EF9AFF16) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=209.62.177.182 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34931 DF PROTO=TCP SPT=12831 DPT=80 WINDOW=393 RES=0x00 ACK FIN URGP=0 OPT (0101080A00060E300018CF53) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=88.80.206.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=64912 DF PROTO=TCP SPT=4517 DPT=80 WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A000827E3EFA93350) 
    SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:a0:d1:33:58:d7:00:09:5b:5e:d0:d3:08:00 SRC=88.80.206.33 DST=192.168.0.2 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=0 DF PROTO=TCP SPT=80 DPT=4517 WINDOW=0 RES=0x00 RST URGP=0 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=209.85.129.166 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=37180 DF PROTO=TCP SPT=5749 DPT=80 WINDOW=63000 RES=0x00 ACK FIN URGP=0 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=209.85.135.165 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=53739 DF PROTO=TCP SPT=14411 DPT=80 WINDOW=63000 RES=0x00 ACK FIN URGP=0 
    e100: eth0: e100_watchdog: link down
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    eth0: no IPv6 routers present
    eth0: no IPv6 routers present
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=213.165.64.210 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52897 DF PROTO=TCP SPT=2392 DPT=80 WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C257D2E1E854D) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=194.112.167.226 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=13859 DF PROTO=TCP SPT=10313 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C35646A06F640) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=194.112.167.226 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20300 DF PROTO=TCP SPT=10334 DPT=80 WINDOW=66 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C3C986A071314) 
    [fglrx] total      GART = 130023424
    [fglrx] free       GART = 108388352
    [fglrx] max single GART = 108388352
    [fglrx] total      LFB  = 134086656
    [fglrx] free       LFB  = 105271296
    [fglrx] max single LFB  = 105271296
    [fglrx] total      Inv  = 0
    [fglrx] free       Inv  = 0
    [fglrx] max single Inv  = 0
    [fglrx] total      TIM  = 0
    SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:a0:d1:33:58:d7:00:09:5b:5e:d0:d3:08:00 SRC=194.112.167.226 DST=192.168.0.2 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=0 DF PROTO=TCP SPT=80 DPT=10263 WINDOW=0 RES=0x00 RST URGP=0 
    SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:a0:d1:33:58:d7:00:09:5b:5e:d0:d3:08:00 SRC=82.113.101.130 DST=192.168.0.2 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=0 DF PROTO=TCP SPT=80 DPT=26766 WINDOW=0 RES=0x00 RST URGP=0 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=212.48.125.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2503 DF PROTO=TCP SPT=29131 DPT=80 WINDOW=66 RES=0x00 ACK FIN URGP=0 OPT (0101080A001895D316D153DA) 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=66.228.125.184 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=24362 DF PROTO=TCP SPT=17054 DPT=80 WINDOW=6741 RES=0x00 ACK FIN URGP=0 
    SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.2 DST=66.228.125.184 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=24363 DF PROTO=TCP SPT=17054 DPT=80 WINDOW=6741 RES=0x00 ACK FIN URGP=0 
    
     
  15. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  16. #14 gropiuskalle, 11.07.2007
    gropiuskalle

    gropiuskalle terra incognita

    Dabei seit:
    01.07.2006
    Beiträge:
    4.857
    Zustimmungen:
    0
    Ort:
    Berlin
    Code:
    jedi@linux-6e1u:~> fdisk -l
    bash: fdisk: command not found
    Vorher also mit 'su' zum root werden. Mit 'exit' bzw. Strg + D verwandelst Du Dich nach dem Kommando wieder in jedi.
     
  17. -Jedi-

    -Jedi- Eroberer

    Dabei seit:
    24.03.2007
    Beiträge:
    61
    Zustimmungen:
    0
    hab am root konto eigentlich eingestellt dass ich auch root bin.
     
Thema:

boot manager verschieben.

Die Seite wird geladen...

boot manager verschieben. - Ähnliche Themen

  1. NetworkManager soll WLAN beim Booten Starten

    NetworkManager soll WLAN beim Booten Starten: Hallo zusammen, ich habe zu diesem Thema gesucht und weder hier noch bei Google etwas gefunden. Und zwar: Ich habe bei mir einen Ubuntu Rechner...
  2. Vista, XP und suse? Wie siehts mim Bootmanager aus?

    Vista, XP und suse? Wie siehts mim Bootmanager aus?: Wenn ich Vista auf nem neuen PC installiert habe, und dann XP installiere, dann ist ja der Vista Bootmanager weg (Den könnt ich nur mit der Vista...
  3. Bootmanager

    Bootmanager: Hi, ich hab mir XP deinstalliert, weil die Partitionen kaputt aber alles "gerart" und auf die Linux Partition kopiert, jetzt kann ich aber nicht...
  4. Bootmanager auf CD anstatt auf Festplatte

    Bootmanager auf CD anstatt auf Festplatte: :hilfe2: Hallo zusammen, ich möchte Linux und XP zusammen auf meinem Rechner laufen lassen, soweit so gut, ich abe dafür einmal die C...
  5. Kein Boot-Manager :-(

    Kein Boot-Manager :-(: Also ich habe einen netten PC Board : K7NF2 CPU : 2600+ AMD Athlon Barton Grafik : ATI x1650pro RAM : 1024MB SATA : 250GB IDE :...