Auflösung von 1024x768 auf 1280x1024 ändern????

theton · 02.12.2006

Das aber auch keine Einstellungen für den Monitor vornimmt.

Mitzekotze · 02.12.2006

Jo okay ich hab keine Ahnung welche der Information in dieser Datei wichtig sein könnte ich hab sie einfach mal komplett gepostet ^^.

@theton Wo soll ich das Tastaturenlayout ändern? Als Desktop hab ich übriegens Gnom falls dir das was weiter hilft.

Übriegens vielen danke für die rege Hilfe und für euer Verständnis.

Code:

 X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686 
Current Operating System: Linux mitzekotze-desktop 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686
Build Date: 07 July 2006
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec  2 08:21:09 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "NVIDIA Corporation NVCrush11 [GeForce2 MX Integrated Graphics]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/misc/,
	/usr/share/fonts/X11/TTF/,
	/usr/share/fonts/X11/OTF,
	/usr/share/fonts/X11/Type1/,
	/usr/share/fonts/X11/CID/,
	/usr/share/fonts/X11/100dpi/,
	/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.0
	X.Org XInput driver : 0.6
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01a4 card 0000,0000 rev b2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ac card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ad card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01aa card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,01b2 card 1043,0c11 rev c3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,01b4 card 1043,0c11 rev c1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,01c2 card 1043,0c11 rev c3 class 0c,03,10 hdr 00
(II) PCI: 00:03:0: chip 10de,01c2 card 1043,0c11 rev c3 class 0c,03,10 hdr 00
(II) PCI: 00:04:0: chip 10de,01c3 card 1043,0c11 rev c2 class 02,00,00 hdr 00
(II) PCI: 00:05:0: chip 10de,01b0 card 1043,0c11 rev c2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,01b1 card 1043,8384 rev c2 class 04,01,00 hdr 80
(II) PCI: 00:08:0: chip 10de,01b8 card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,01bc card 1043,0c11 rev c3 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01b7 card 0000,0000 rev b2 class 06,04,00 hdr 01
(II) PCI: 01:06:0: chip 11ab,1faa card 1385,6b00 rev 03 class 02,00,00 hdr 00
(II) PCI: 02:00:0: chip 10de,01a0 card 1043,0c11 rev b1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xeff00000 - 0xf7ffffff (0x8100000) MX[B]
(--) PCI:*(2:0:0) nVidia Corporation NVCrush11 [GeForce2 MX Integrated Graphics] rev 177, Mem @ 0xeb000000/24, 0xf0000000/27, BIOS @ 0xefff0000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[1] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[2] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[3] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[4] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[5] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[6] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[7] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[8] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[9] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[11] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[12] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[13] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[14] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[15] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[16] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[17] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[1] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[2] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[3] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[4] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[5] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[6] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[7] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[8] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[9] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[11] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[12] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[13] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[14] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[15] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[16] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[17] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[5] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[6] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[7] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[8] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[9] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[10] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[13] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[14] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[18] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[19] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[22] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[23] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.1.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.8776
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.8776
	Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) NVIDIA X Driver  1.0-8776  Mon Oct 16 21:58:46 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[5] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[6] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[7] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[8] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[9] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[10] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[13] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[14] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[18] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[19] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[22] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[23] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[5] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[6] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[7] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[8] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[9] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[10] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[13] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[14] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[21] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[22] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[23] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[24] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[25] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[26] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
	[27] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[28] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce2 Integrated GPU at PCI:2:0:0
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(--) NVIDIA(0): VideoBIOS: 03.1a.01.03.02
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce2 Integrated GPU at
(--) NVIDIA(0):     PCI:2:0:0:
(--) NVIDIA(0):     MED MD 1998 OF (CRT-0)
(--) NVIDIA(0): MED MD 1998 OF (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): Insufficient memory bandwidth for MetaMode "1280x1024";
(WW) NVIDIA(0):     discarding.
(WW) NVIDIA(0): No valid modes for "1280x1024"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (90, 96); computed from "UseEdidDpi" X config option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
	[1] 0	0	0xeb000000 - 0xebffffff (0x1000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xec000000 - 0xec00ffff (0x10000) MX[B]
	[7] -1	0	0xec800000 - 0xec80ffff (0x10000) MX[B]
	[8] -1	0	0xed000000 - 0xed000fff (0x1000) MX[B]
	[9] -1	0	0xed800000 - 0xed87ffff (0x80000) MX[B]
	[10] -1	0	0xee000000 - 0xee0003ff (0x400) MX[B]
	[11] -1	0	0xee800000 - 0xee800fff (0x1000) MX[B]
	[12] -1	0	0xef000000 - 0xef000fff (0x1000) MX[B]
	[13] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[14] -1	0	0xefff0000 - 0xefffffff (0x10000) MX[B](B)
	[15] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[16] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[23] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
	[24] -1	0	0x0000e100 - 0x0000e1ff (0x100) IX[B]
	[25] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[26] -1	0	0x00005100 - 0x0000511f (0x20) IX[B]
	[27] -1	0	0x00005500 - 0x0000550f (0x10) IX[B]
	[28] -1	0	0x00005000 - 0x0000500f (0x10) IX[B]
	[29] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[30] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    xkb_keycodes             { include "xfree86+aliases(qwertz)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+de+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
SetGrabKeysState - disabled
SetGrabKeysState - enabled
    xkb_compatibility        { include "%" };
    xkb_symbols              { include "%" };
    xkb_geometry             { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
    xkb_keycodes             { include "xfree86+aliases(qwertz)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+de(ro_nodeadkeys)+level3(ralt_switch_for_alts_toggle)+group(alts_toggle)+level3(ralt_switch)" };
    xkb_geometry             { include "microsoft(natural)" };

kbdcalls · 02.12.2006

Konfiguriere den Xserver doch erst mal so wie ich beschrieben habe. Als Modul trägst du erst einmal nv ein. Alles andere wird der Reihe nach abgefragt. Und wenn das ersteinmal richtig läuft kannst du an die Einrichung des eigentlich Nvidia Treiber gehen. Aber lesen was er dich fragt

Mitzekotze · 02.12.2006

Also die am Anfang meiner xorg.conf steht genau das selbe wie bei dir und was hast du mit der Horizsyc Wert gemeint? Soll ich dort einfach z.b. 90 anstatt 51 eintragen und wo befindet sich das Modul das ich in nv ändern soll? So ich glaub das waren alle meine Fragen ^^.

kbdcalls · 02.12.2006

Für die genauen Werte deines Monitors mußt du in dein Handbuch des Monitors/Rechners reinsehen. Da stehen die genauen Werte drinne. Und bei dpkg-reconfigure wird doch alles abgefragt. Du mußt nur lesen was angezeigt wird und dementspechend eintragen. Die Fragen nach der PCI ID und dem Speicher der Grafikkarte kannst du ignorieren also leer lassen.

Jehova1 · 02.12.2006

Bei mir hat "dpkg-reconfigure xserver-xorg" auch mit einer NVidia-Karte wunderbar geklappt - Dort kannst du dann auch die möglichen Auflösungen aktivieren ( [ ] + Leertaste = [*] )

Mitzekotze · 02.12.2006

Okay jetzt weis ich was ihr mir versucht habt die ganze Zeit krampfhaft zu sagen. Sorry ^^. Aber jetzt kommt nach dem ich den Namen der Grafikkarte eintragen hab diese Meldung von dort aus ich auch nicht mehr weiter komm. Kann mir einer erklären was sie bedeutet.

Code:

┌───────────────────────┤ Konfiguriere xserver-xorg ├───────────────────────┐  
 │                                                                           │  
 │ Users of PowerPC machines, and users of any computer with multiple video  ↑  
 │ devices, should specify the BusID of the video card in an accepted        ▮  
 │ bus-specific format.                                                      ▒  
 │                                                                           ▒  
 │ Examples:                                                                 ▒  
 │                                                                           ▒  
 │  ISA:1                                                                    ▒  
 │  PCI:0:16:0                                                               ▒  
 │  SBUS:/iommu@0,10000000/sbus@0,10001000/SUNW,tcx@2,800000                 ▒  
 │                                                                           ▒  
 │                                                                           ▒  
 │ For users of multi-head setups, this option will configure only one of    ▒  
 │ the heads.  Further configuration will have to be done manually in the X  ▒  
 │ server configuration file, /etc/X11/xorg.conf.                            ↓

kbdcalls · 02.12.2006

Das war gerade was du ignorieren solltst. Das kommt nur in betracht wenn du zwei Grafikkarten hast.

Mitzekotze · 02.12.2006

öhm okay und was wäre jetzt der nächste Schritt?

Das Handbuch für meinen Monitor hab ich übriegens praktischerweiße nicht mehr.

kbdcalls · 02.12.2006

Wie heist der Monitor denn, bzw. was hat Windows eingestellt. Und dann gehts weiter.

Mitzekotze · 03.12.2006

Hab in ebay mal nach meinem gesucht hab diesen hier gefunden ich bin ziemlich sicher das meiner von der selben Bauart ist. http://cgi.ebay.de/Monitor-von-Medion-19_W0QQitemZ220053608477QQihZ012QQcategoryZ3696QQrdZ1QQcmdZViewItem (Anzeige)

kbdcalls · 03.12.2006

Der Monitor hat doch ein Typenschild ? Und hast du mal angesehen was Windows einstellt ?

Mitzekotze · 03.12.2006

So hab das Typenschild "gefunden" (war die ganze Zeit praktisch vor meiner Nase sorry) Model No.: MD 1998 OF 50/60 Hz

Aber welche Windowseinstellungen meinst du?

kbdcalls · 03.12.2006

Systemsteuerung Anzeige Monitor. Da sieh dich mal ein bischen um.

Mitzekotze · 03.12.2006

mh also Bilschirmauflösung ist 1280x1024, Farbqualität 32 Bit, Plug and Play-Monitor mit NVIDIA GeForce2 Integrated GPU ( Microsoft Corporation).
Jo das was.

Mitzekotze · 07.12.2006

Mh okay um das Thema vielleicht wieder zu beleben mir würde es schon reichen wenn mir jemand erklären könnte wie ich unter Gnome die Desktopsymbole verkleinern kann. Denn ich denk die Auflösung von 1024x768 reicht mir im Grunde was mich halt stört sind die fetten Symbole.

theton · 08.12.2006

Rechtsklick auf ein Symbol und dann hast du dort einen Menü-Punkt, mit dem du das Symbol skalieren kannst.
Warum du allerdings keine höhere Auflösung bekommst kann ich dir nicht sagen. Ich tippe aber mal, dass es an falschen Sync-Einstellungen liegt. Such einfach mal bei Google, evtl. findest du ein Handbuch für deinen Monitor als PDF oder wenigstens die Sync-Raten von dem Teil.

ikemi · 08.12.2006

Moin,

in solchen Fällen gehe ich wie folgt vor:

Google = Medion

www.medion.at

Dort suchst du einen Windows Treiber für deinen Monitor. Du entzippst das ganze irgendwo hin und gehts in diesen Ordner. Dort findest du mit ein wenig suchen "deinen" Monitor. In diesem Ordner gibt es dann eine .inf Datei in der folgendes steht:

Code:

[1600]
HKR,,MaxResolution,,"1600,1200"

[DPMS]
HKR,,DPMS,,1


[1998OF.AddReg]
HKR,"MODES\1600,1200",Model,,"30.0-98.0,50.0-160.0,+,+"
HKR,,IcmProfile,0,"1998OF.icm"

Deine Einstellung in der XConf ist also HorizSync 30.0 - 98.0 / VertRefresh 50.0 - 160.0

HTH!

j_u_l_eee · 11.12.2006

hi ähm, um mal auf die erste frage die hier gestellt wurde zurückzukommen... ich hab gestern ubuntu installiert und versuche ebenfalls krampfhaft meine auflösung höher zu stellen aber ich bin mehrmals nach den beschriebenen schrtten vorgegangen und es hat sich nichts getan, bzw ich bin da stecken geblieben als ich die konsole geöffnet hatte und meinen benutzernamen (der installation) einegeben habe und mein pw. dann war auch alles ok, nur ich habe einen ellenlangen text über sudo etc lesen können und hab es nicht geschafft einen texteditor zu öffnen, denn wenn ich zB den pfad angeben habe: /usr/bin/gedit dann hat er mich irgendwas gefragt wie: isn't this a binary file? oder so und hat gesagt ich solle enter drücken, wonach erschien, dass er nicht auf "su" zugreifen kann und ich wieder enter drücken sollte und schließlich wieder bei meinem ellenlangen text landete... hilfe

Mitzekotze · 11.12.2006

Code:

sudo gedit /etc/X11/xorg.conf

Hast du mal das in der Konsole eingegeben das hat mich zumindest in die Datei xorg.conf mit schreibrecht gebracht. Danke deshalb nochmal an theton

.
Kann aber auch sein das ich deine Frage nicht ganz verstanden hab ^^.

Mein Problem hinsichtlich der Auflösung hat sich geklärt. Ich verwende jetzt als Desktop xfce und dort hab ich endlich den Platz den ich brauch ^^.

Auflösung von 1024x768 auf 1280x1024 ändern????

theton

Bitmuncher

Mitzekotze

little man

kbdcalls

Master of Universe

Mitzekotze

little man

kbdcalls

Master of Universe

Jehova1

Routinier

Mitzekotze

little man

kbdcalls

Master of Universe

Mitzekotze

little man

kbdcalls

Master of Universe

Mitzekotze

little man

kbdcalls

Master of Universe

Mitzekotze

little man

kbdcalls

Master of Universe

Mitzekotze

little man

Mitzekotze

little man

theton

Bitmuncher

ikemi

Foren As

j_u_l_eee

Grünschnabel

Mitzekotze

little man

Ähnliche Themen

X zeigt Elemente an, als ob sie zu einer anderen Auflösung gehören würden

Xenemera, XGL, 2 Monitore mit verschiedener Auflösung

Server-Monitoring mit RRDTool

Neueste Themen